VE-B4H-CX-F4

Current - Output (Max):	1.44A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	52V
Voltage - Input (Max):	100V
Voltage - Input (Min):	55V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices that convert direct current (DC) from one voltage level to another. This type of converter is often used in applications where either the supply or the load is connected directly to a DC power source. The most common type of DC-DC converter is the VE-B4H-CX-F4, which is used for high-frequency applications such as high-speed communication systems.The VE-B4H-CX-F4 is a type of DC-DC converter that utilizes rectified current to produce a stable output voltage. It works by using a bridge rectifier to convert DC voltage from the input source to a higher level, and then through a low pass filter, it reduces the amount of ripple voltage and electrical noise before the output is sent to the load. The main components of the VE-B4H-CX-F4 DC-DC converter are the bridge rectifier, the low pass filter, and an oscillator.The bridge rectifier is designed to convert AC current to DC current, and it does this by utilizing four diodes to convert the alternating current into direct current. It works by connecting the two input terminals and the output terminal of the converter with two pairs of diodes in parallel. When the power source is connected, current will flow in one direction, allowing a DC output voltage of up to 250 volts to be generated.The low pass filter is used to reduce the amount of unwanted electrical noise and ripple voltage from the output voltage of the bridgE rectifier. It works by utilizing an R-C network to gradually reduce the voltage from the input terminal to its output terminal. The frequency response of this filter is typically in the range of 10-100 Hz, meaning that it reduces the frequency of the waves above this limit while keeping the lower frequencies intact.The oscillator is used to provide a stable frequency for the output voltage. It works by using an AC source to provide a reference signal which is then applied to the input of the oscillator. The frequency of this signal is predetermined by the oscillator\'s components and is regulated with a voltage feedback loop. This ensures that the output voltage remains stable regardless of the load connected to it.The VE-B4H-CX-F4 DC-DC converter is used in a variety of applications such as telecommunication systems, industrial motor drives, computers, and other electronic devices. It has become an integral part of many electrical systems due to its reliable operation and its small size. It has the ability to handle a wide range of input and output voltages, making it a versatile device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference