VS-ST110S04P1VPBF

Current - On State (It (RMS)) (Max):	175A
Supplier Device Package:	TO-209AC (TO-94)
Package / Case:	TO-209AC, TO-94-4, Stud
Mounting Type:	Chassis, Stud Mount
Operating Temperature:	-40°C ~ 125°C
SCR Type:	Standard Recovery
Current - Non Rep. Surge 50, 60Hz (Itsm):	2270A, 2380A
Current - Off State (Max):	20mA
Current - Hold (Ih) (Max):	600mA
Series:	--
Current - On State (It (AV)) (Max):	110A
Voltage - On State (Vtm) (Max):	1.52V
Current - Gate Trigger (Igt) (Max):	150mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Voltage - Off State:	400V
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs (Silicon Controlled Rectifiers) are power semiconductor devices that contain multiple layers of silicon and are typically used to control electrical current flow. The VS-ST110S04P1VPBF is a high-power silicon controlled rectifier (SCR) that is usually used in mains switching applications.The VS-ST110S04P1VPBF is designed for a range of voltages, including 10V to 660V. The maximum allowable peak current of a single SCR is 110A, making it ideal for projects with higher power requirements. The device features a high dielectric strength and is capable of withstanding up to 1500V. The operating temperature range of this device is -40°C to 150°C.The VS-ST110S04P1VPBF is mainly used in AC circuit control applications like light dimming, motor speed control, heating system control, industrial automation, and power supply control. You can also use it to control electric heaters and single-phase AC motors. In these applications, the VS-ST110S04P1VPBF acts as a switch that is used to either switch on or switch off the current flow.The working principle of the VS-ST110S04P1VPBF is relatively straightforward. It acts as a two-terminal electronic switch that can be triggered into two different states (on or off) using electrical signals. When the control terminal is switched off, the SCR is in an open state and no current flow occurs. When the control terminal is triggered, the SCR is closed and a current flow will occur. This can then be used to switch a large load current on or off.The VS-ST110S04P1VPBF is capable of bi-directional operation, which means it can start and stop circuit currents going in either direction. The device also features a low saturation voltage, allowing for higher power efficiency. This can be useful when running large loads, such as motors, or for applications that require high switching speeds.In summary, the VS-ST110S04P1VPBF is a high-power SCR that is mainly used in AC circuit control applications. It is capable of bi-directional operation and has a high dielectric strength. The device can handle high power loads, making it an ideal option for projects with higher power requirements. Its working principle is based on the triggering of the control terminal to switch the current flow on or off.

The specific data is subject to PDF, and the above content is for reference