XR16V598IQ100-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UART stands for Universal Asynchronous Receiver Transmitter and is a type of protocol used for communication between two electronic devices such as a microprocessor and a fabric. It consists of a transmitter and receiver section connected by a data line. The XR16V598IQ100-F is a Field Programmable Gate Array Family (FPGAs) device with an integrated UART interface. This device is a low-cost, low-power, high-performance FPGA chip that can be used in a variety of applications.

The XR16V598IQ100-F is ideal for embedded systems as it can be used to communicate with multiple peripherals and microcontrollers. It has two UART Transmitters (TX) and two UART Receivers (RX). The two Rxs allow for simultaneous reception of data from two serial ports and the two Txs can be used for transmitting data to different peripherals. This allows the user to configure and control multiple UART channels.

The XR16V598IQ100-F is a low-cost microcontroller with an integrated UART interface that allows users to configure, control and monitor multiple UART channels. One of the most popular applications for the XR16V598IQ100-F is as a modem-interface for GPRS/GSM communications and for low-cost data transmission networks. The remote device identification and authentication is also supported by this FPGA chip, allowing it to be used in a variety of Industrial and automation systems.

The working principle behind UART is the process by which a computer or microcontroller can communicate with other serial communication devices such as modems, printers, or other peripherals. UARTs work by sending and receiving asynchronous data packets, where the start and stop bits are set to define the beginning and end of a frame. The data frame then holds the information being sent, and the receiver can then decode the information.

The XR16V598IQ100-F UARTs use a combination of 8- and 16-bit data frames with both half- and full-duplex (two-way) communication available. The data is transmitted over a serial communication line that can be set to the RS-232, RS-485, or Belden 9000 protocol. The different data frames allow the user to choose the most efficient data packet size for the application. The UART also supports various modes of operation such as programmable baud rate, parity setting, and some special functions like modem control.

In addition to the modem-interfacing and networking capabilities, the XR16V598IQ100-F can also be used as a digital output I/O device. The two receiver and two transmitter ports can be used to control and monitor a variety of digital devices such as temperature sensors or pressure switches. As the FPGA chip is configurable its functionality can be easily adjusted depending on the application.

Overall, the XR16V598IQ100-F is a versatile FPGA chip with a built-in UART interface that can be used for a variety of industrial and consumer applications. The UART protocol itself is a simple, yet powerful serial communication protocol that provides the flexibility needed for modern embedded systems. Whether it’s used for remote device identification and authentication, or interfacing with a modem, the XR16V598IQ100-F is an ideal choice for anyone looking for a reliable, low-cost, and easy to use UART solution.

The specific data is subject to PDF, and the above content is for reference