RNC50H2000BRB14

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RNC50H2000BRB14 application field and working principle

Through Hole Resistors, or THRs, are one of the most versatile and widely used components in electronic design. These components are used for a wide range of applications, from voltage dividing to current limiting, and are used to reduce power dissipation in circuits. THRs are available in a variety of sizes, shapes, and resistance values, and can suit a variety of electrical requirements. In this article, we will take a look at the application field and working principle of the RNC50H2000BRB14 THR.

Application Field of the RNC50H2000BRB14 THR

The RNC50H2000BRB14 THR is a radial leaded, ceramic encased THR with a rated power dissipation of 0.5W and an insulation resistance of 2000MΩ. This particular THR is designed for a wide range of uses, from power supply voltage regulating to switched-mode power supply (SMPS) load distribution. It has a maximum voltage rating of up to 250V with a tolerance of ±5%. Not only is it suitable for pulse load and audio circuit use, but it can also be used as a ballast for fluorescent tubes and other AC applications.

Working Principle of the RNC50H2000BRB14 THR

The RNC50H2000BRB14 is a two-terminal component that works by limiting the current passing through it on a continuous basis. This is achieved through a voltage-dependent resistance, which is provided by a strip of material known as a resistance element. The resistance element is a thin film of metal deposited on a ceramic substrate material. As the voltage across the terminal increases, the resistance of the element also increases, thus limiting the amount of current that can pass through it. Because the resistance element is ceramic-encased, it is also able to tolerate extreme temperatures and environmental conditions, making it suitable for a variety of uses.

In addition, the RNC50H2000BRB14 is designed with two lead wires, allowing it to be readily mounted on surfaces for quick and easy installation. It also has a high insulation resistance of 2000MΩ, making it resistant to electrical shocks and surges. The difference between the working principle of the RNC50H2000BRB14 and other resistors is the use of a ceramic substrate, which provides greater heat dissipation and improved stability in the circuit.

Conclusion

The RNC50H2000BRB14 THR is a highly versatile and reliable component, suitable for a wide range of applications. Its ceramic encased resistance element enables it to provide increased power dissipation and improved stability, making it suitable for use in a variety of electronic designs. Its two-terminal design and ceramic substrate make it easy to mount, while its high insulation resistance makes it resistant to electrical shocks and surges. With its many advantages, the RNC50H2000BRB14 THR is an invaluable component in any circuit.

The specific data is subject to PDF, and the above content is for reference