RNC55J1004BSRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a type of component found in many electronic devices, from power supplies to electric motors and from consumer appliances to instruments. The RNC55J1004BSRE6 is one example of this type of resistor, and its application field and working principle are important considerations in selecting and utilizing through hole resistors.

The RNC55J1004BSRE6 is a through hole resistor with a resistance rating of 1 ohm. It is a non-inductive resistor, which means that it does not have an inductive component which adds additional capacitance or resistance. The resistance value is maintained no matter the frequency of the alternating current, and can even handle continuous current up to 1 ampere. The resistor is rated for a power rating of 1/2 watt, which is high enough for most applications.

The application field of the RNC55J1004BSRE6 is primarily electrical and electronic engineering. It is commonly used in power supplies, motor controls, consumer appliances, and instrumentation circuits. It is especially common in audio and video applications, where its low resistance value allows it to act as a low-level impedance resistor. This serves to prevent noise from interfering with the signal.

Working principle wise, this type of resistor works on the principle of electrical resistance. When an electric current passes through the resistor, it will experience a voltage drop proportional to the resistance value, dissipating the energy as heat. This is why a resistor is commonly referred to as a “dissipator”. The RNC55J1004BSRE6 resistor is rare among resistors because it is noninductive, meaning that it does not have an inductive component that causes additional capacitance or resistance.

The RNC55J1004BSRE6 is a great choice for electrical and electronic engineering. Its 1 ohm resistance value provides a high level of protection from interference, while its non-inductive nature ensures that it will not interfere with the signal. The 1/2 watt power rating is sufficient for most application needs, and its through hole design makes it easy to install. This resistor is a versatile and reliable component for many applications.

The specific data is subject to PDF, and the above content is for reference