BK/GDC-160MA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses, in their broadest sense, are components used in electrical systems to separate an overloaded circuit from the rest of the system, and to prevent short-circuiting between two points in the system. Fuses are used to protect delicate equipment or personnel from injury or damage caused by over-current flowing through an overloaded circuit. The BK/GDC-160MA Fuse is an example of a fuse commonly used in residential, commercial and industrial applications.

The BK/GDC-160MA Fuse is a single-pole, single-pole thermal fuse manufactured by Bussmann. It is often used in consumer appliances, office equipment, and industrial and commercial applications. It has a 6.3mm/10mm diameter and a standard, non-restricting, bimetallic-type design. It is rated for 16 Amps of continuous current and operates up to 20 Amps for up to 1 minute.

In a standard circuit, an over-current protection device such as the BK/GDC-160MA Fuse is used to monitor the electrical current flowing through the circuit. When an overload or short circuit occurs, the over-current protection device will open the circuit, allowing it to reset itself without interrupting power to the other devices connected to the circuit. In order to determine the cause of the fault, the circuit must first be tested to determine where the overload has occurred. The BK/GDC-160MA Fuse is designed to respond quickly when an overload occurs, providing a fast, efficient solution to prevent further damage to the circuit.

The BK/GDC-160MA Fuse operates by a principle called thermal disconnect. This principle works by employing a heat-sensitive bimetal within the fuse element. When the current flow becomes excessive, the bimetal bends and crushes the metallic element. This causes the fuse element to break, thereby opening the circuit. The BK/GDC-160MA Fuse is designed to have a very low resistance to ensure that it has an instantaneous response time to any over-current situation. Once the over-current situation has been detected and the fuse has opened the circuit, it will remain open until the over-current situation has been resolved.

The BK/GDC-160MA Fuse has a voltage rating of 250V AC/DC and is certified for CE Mark requirements. It is rated for use in domestic and commercial applications such as kitchen appliances, personal computers, office equipment, HVAC, and many other electrical systems. The BK/GDC-160MA Fuse is a reliable solution for providing both over-current and short circuit protection, and is an economical option when compared to other types of protective devices.

The BK/GDC-160MA Fuse is a simple and reliable device that can be used in a wide variety of applications. It is designed to protect against excessive current flow and to provide over-current and short circuit protection. Its low resistance ensures that it responds quickly to detect and prevent damage to the circuit. As a reliable and cost-effective solution for overload and short-circuit protection, the BK/GDC-160MA Fuse is an excellent choice for residential, commercial, and industrial applications.

The specific data is subject to PDF, and the above content is for reference