Series:	LEL
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	2
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers

LEL11-35747-10-V Application Field and Working Principle

Circuit breakers are electrical devices that are designed to protect electrical systems and components from excessive current flow. They are widely used in a variety of residential, commercial, and industrial applications. The LEL11-35747-10-V, commonly referred to as a Miniature Circuit Breaker (MCB), is a type of circuit breaker that is specifically designed for use in smaller electrical applications.The LEL11-35747-10-V is designed to provide protection against both over current and short circuit conditions. The circuit breaker is usually installed in the circuit to protect mechanical, electrical, and electronic components from excessive current. It is typically rated for a maximum amperage of 10A, and can be used on both AC and DC circuits. The breaker has a reset button that must be manually pressed to allow current to flow through the circuit again after a fault has been detected.The internal operation of the LEL11-35747-10-V is relatively simple. It is typically enclosed in a molded plastic case and contains rows of contacts that serve as the main circuit connection points. Inside the case, the contacts are held in place by a spring loaded mechanism. The contacts are connected to an overload sensing or protection device, which is set to trip at a certain pre-determined amperage.When the circuit is functioning normally, the contacts remain open. As soon as the current level reaches a value greater than the preset trip level, the overloaded sensing module trips and the contacts close. This causes the contacts to open, which immediately interrupts the flow of current and prevents any further damage to the electrical system.In addition to protecting components from excess current, the LEL11-35747-10-V also serves as a manual reset switch in cases where mechanical or electrical components fail. By pressing the reset button, the contacts open and allow current to flow again through the circuit. This allows the system to be restarted and the fault condition to be rectified.The LEL11-35747-10-V is designed to be a low cost, simple, and reliable solution for protecting electrical circuits and components from damage caused by excess current flow. It is a common and cost-effective solution for many commercial, residential, and industrial applications. The device is also designed to be easily serviced in cases of failure, allowing for quick repairs to be performed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description