IALNPK11-39556-200 Circuit Protection

Series:	IAL
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	2
Actuator Type:	Toggle
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers: IALNPK11-39556-200 Application Field and Working Principle

Circuit breakers are important components in electronic circuits and power distribution systems. They are responsible for protecting the circuit from an overload or short circuit. The IALNPK11-39556-200 is a specific type of circuit breaker that is widely used in residential, commercial, and industrial applications. This article will discuss the applications and working principles of the IALNPK11-39556-200.The IALNPK11-39556-200 is designed for use in electrical systems and circuits where maximum current interruption and the ability to operate under loads from 1A to 2000A are required. It is ideal for protecting residential, commercial, and industrial circuits, including those found in HVAC (heating, ventilation, and air conditioning) and electrical control equipment.As a thermal-magnetic device, the IALNPK11-39556-200 is equipped with three primary components: a thermal magnetic element, an auxiliary contact, and an adjustable trip current setting. The thermal magnetic element is composed of one or more current testing coils, which are responsible for detecting changes in current flowing through the circuit. The coil will activate the breaking mechanism when the set trip current has been exceeded. The auxiliary contact provides an electrical switch which can be used to control other circuits, such as the reset coils in a reset switch. The adjustable trip current setting allows the user to customize the circuit breaker for different applications and amperage ratings.When a pre-set current limit is exceeded, the IALNPK11-39556-200 trips and opens the circuit. This interrupts the power flow and prevents any further damage or harm to the circuit and all the components connected to it. The trip time of the IALNPK11-39556-200 depends on factors such as the load impedance and the range of current: but its average trip time is approximately 8 milliseconds. In addition to overload and short circuit protection, the IALNPK11-39556-200 offers other benefits. It can act as an isolator, allowing for the separation of circuits with high wattage loads. It can also offer protection against electromagnetic interference - a common source of electrical disturbance.The IALNPK11-39556-200 is an easy-to-install and simple-to-operate circuit breaker that can be used in a range of applications. The adjustable trip current settings allow for smooth operation and reliable protection. The device is also UL approved, meaning it has met all of the requirements for safety and performance.In conclusion, the IALNPK11-39556-200 is a versatile and reliable circuit breaker suitable for a variety of applications. It is equipped with a thermal-magnetic element, an auxiliary contact, and an adjustable current setting to offer overload and short circuit protection. It also offers additional benefits such as isolation and protection from electromagnetic interference. This makes it an ideal choice for residential, commercial, and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description