IALN111-1-42-15.0 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are integral components of any electrical system. An IALN111-1-42-15.0 is an example of a particular model of circuit breaker. The purpose of circuit breakers is to protect electrical systems and components by quickly disconnecting affected circuits in the event of an overload or short. This helps prevent damage to electrical systems caused by excess current caused by a power surge or failure. In addition to providing protection, circuit breakers offer convenience as they are easily reset and reused.

The IALN111-1-42-15.0 circuit breaker is designed for medium-voltage applications. It is a type of molded-case circuit breaker (MCCB) and is suitable for both three- and four-wire systems. The IALN111-1-42-15.0 is rated for 15 kV and can handle up to ±2% voltage imbalance. It meets or exceeds UL approval and is also fully compliant with IEC standards.

The IALN111-1-42-15.0 circuit breaker has the following features: adjustable thermal trip, adjustable magnetic trip, quick-make/quick-break operations, manual override, and anti-pumping protection. All of these features work together to ensure a safe and reliable operation of the circuit breaker.

The adjustable thermal trip prevents overheating in the device once the current exceeds safe levels. Once the current exceeds the pre-set threshold, the trip will either trip the breaker or reset it to prevent continued overload. The adjustable magnetic trip also helps to protect against overcurrent since it is sensitive to changes in the load. Quick-make/quick-break operations provide a fast response to overloads, as it will rapidly trip and reset, rather than waiting for an extended period of time. The manual override allows the breaker to be manually tripped and reset in case of an emergency, and the anti-pumping protection ensures that the breaker will remain off until reset.

To install the IALN111-1-42-15.0 circuit breaker, it should be wired to its applicable power distribution panel. The wiring will require running a neutral, ground, and two or three hots. Then the IALN111-1-42-15.0 breaker should be mounted and the wires connected to it. Once the wiring is complete, the breaker can then be tested and inspected for proper installation.

The IALN111-1-42-15.0 is an ideal solution for medium-voltage applications where reliability and safety are key. With its adjustable thermal and magnetic trips, quick-make/quick-break operations, manual override, and anti-pumping protection, it helps to ensure that your electrical systems remain safe and operational.

The specific data is subject to PDF, and the above content is for reference