52923

Series:	PIDG
Packaging:	Bulk
Part Status:	Active
Terminal Type:	Spring, Snap
Stud/Tab Size:	5 Stud
Width - Outer Edges:	0.250" (6.35mm)
Length - Overall:	0.679" (17.25mm)
Mounting Type:	Free Hanging (In-Line)
Termination:	Crimp
Wire Gauge:	22-26 AWG
Insulation:	Insulated
Features:	Serrated Termination
Color:	Yellow
Contact Finish:	Tin
Contact Material:	Phosphor Bronze
Insulation Diameter:	0.050" ~ 0.082" (1.27mm ~ 2.08mm)
Material - Insulation:	Polyamide (PA), Nylon
Length - Ring Center to Termination:	0.203" (5.16mm)
Length - Termination:	0.331" (8.41mm)
Tongue Inside Opening:	0.130" (3.30mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Spade Connectors

Spade connectors, also known as 52923 connectors, are a type of electrical connector commonly used in electrical and electronic connection systems. These connectors are typically used to connect electrical wires in a variety of applications, and are designed to provide reliable, secure connections, as well as protecting the wire from damage or shorts.There are several types of spade connectors available, which vary based on the size, material, and application of the connector. Spade connectors are the most commonly used electrical terminals, due to their wide range of uses, relatively low cost, and ease of installation.

Application Field

Spade connectors are popular in a variety of applications, including automotive, mechanical, and consumer electronics. For example, spade connectors are often used in automotive wiring to connect engine components and other electrical systems. In the industrial sector, spade connectors are commonly used for wiring in control panels and conveyor belts. Additionally, spade connectors are used in consumer electronics such as televisions, stereos, computers, and electronic components.

Working Principle

The working principle of spade connectors is relatively simple. The connector consists of two parts, a “male” and a “female” connector. The male connector is typically designed as a metal tab, which slides into the female connector and locks in place. The female connector is traditionally designed as a plastic block with a hole in the center. The tab of the male connector slides into the female connector, and is then locked in place with a small metal clip.The two parts of the spade connector ensure a secure connection while allowing the wiring to be changed quickly and easily. The clips provide extra security by preventing the connection from being accidently disconnected. Additionally, the plastic block of the female connector provides insulation, protecting the exposed wires from electric shorts or other potential hazards.

Advantages

Spade connectors offer several advantages over other types of connectors. First and foremost, they are relatively cheap and easy to install compared to other types of connectors. Additionally, spade connectors are quick and easy to connect and disconnect, making them ideal for applications where frequent connections or changes are needed. Spade connectors also provide excellent insulation, keeping the electrical connections secure and safe. This is especially important in industrial or automotive applications.

Disadvantages

Despite the advantages, there are a few drawbacks to using spade connectors. First, the metal clips used to secure the connection can become brittle over time, leading to disconnection and potential failure. Additionally, the metal tab of the male connector may corrode or rust over time, which can cause a connection failure. Finally, spade connectors are not recommended for use in extremely high-voltage applications, as the insulation of the female connector may not be sufficient to protect the connection from arcing or shorts.

Conclusion

Spade connectors, or 52923 connectors, are one of the most popular types of electrical connectors available. They are inexpensive, easy to install, and provide a secure connection. They have a wide range of uses in automotive, mechanical, and consumer electronics applications, and are generally reliable and safe. However, they should not be used in extremely high-voltage applications, and the metal clips used to secure the connection can become brittle over time.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description