Allicdata Part #: | 7V-30.000MAHK-T-ND |
Manufacturer Part#: |
7V-30.000MAHK-T |
Price: | $ 0.34 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 30.000MHZ 20PF SMD |
More Detail: | 30MHz ±30ppm Crystal 20pF 60 Ohms 4-SMD, No Lead |
DataSheet: | 7V-30.000MAHK-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.30831 |
Series: | 7V |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 30MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.035" (0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are one of the most important components found in electrical and electronics applications. They are used to create oscillators that generate signals of a specific frequency. The 7V-30.000MAHK-T is a commonly used crystal, found in a variety of applications. In this article, we will discuss the application field and working principle of a 7V-30.000MAHK-T crystal.
A 7V-30.000MAHK-T crystal is used in a wide range of applications. It is commonly used in medical equipment, instrumentation, military, aerospace and consumer electronics. This type of crystal is also used in GPS systems, mobile phones, scanners and digital radio receivers.
The 7V-30.000MAHK-T crystal is a quartz crystal oscillator. Quartz crystals are made up of piezoelectric material, which is an electrical insulator that vibrates when current passes through it. This vibration is then converted into an electrical signal. When an alternating current is applied to the crystal, it oscillates at a certain frequency, depending on the size and shape of the crystal. The 7V-30.000MAHK-T oscillates at a frequency of 30.000MHZ.
The working principle of a 7V-30.000MAHK-T crystal is relatively simple. When current passes through the crystal, it vibrates at its natural frequency. As this vibration is damped, it gradually decreases in amplitude. This is known as the “Q factor”, which is a measure of the sharpness of the resonance peak generated by the crystal. The 7V-30.000MAHK has a high quality factor, allowing it to resonate more sharply and accurately at its natural frequency.
When the 7V-30.000MAHK-T is connected to a circuit, it will output a square wave signal. This signal can then be used as an input to a digital circuit and can be used to generate a clock signal. A 7V-30.000MAHK-T can also be used in oscillator circuits to generate other types of signals such as sine waves and triangle waves.
In conclusion, the 7V-30.000MAHK-T is a widely used crystal that can be found in a variety of applications. It is a quartz crystal oscillator that vibrates at a frequency of 30.000MHZ when an alternating current is applied to it. The working principle of this crystal is based on the “Q factor”, which is a measure of the sharpness of the resonance peak it generates. Overall, the 7V-30.000MAHK-T is an essential component in many electronics applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...