Allicdata Part #: | 614-41-308-31-012000-ND |
Manufacturer Part#: |
614-41-308-31-012000 |
Price: | $ 8.53 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Mill-Max Manufacturing Corp. |
Short Description: | SKT CARRIER PGA |
More Detail: | N/A |
DataSheet: | 614-41-308-31-012000 Datasheet/PDF |
Quantity: | 1000 |
50 +: | $ 7.75432 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Sockets for ICs, Transistors
Sockets are widely used in electronic component assemblies for ICs, transistors, resistors, capacitors and other components to hold them in place. They greatly reduce the amount of time needed to connect and disconnect electrical connections and also reduces the possibility of damaging delicate components.
The 614-41-308-31-012000 application field and working principle of sockets cover all types of integrated circuits (ICs), transistors and other components that require a connection to the circuit board. The sockets are used to reduce the amount of solder used for connections, thereby reducing the cost and complexity of the assembly.
Sockets are constructed from either plastic or metal housings, depending on the type of component being used. The contacts are usually gold-plated to ensure reliable connections. These contacts are designed to make contact with the pins of the chip or component being mounted. The socket also has an integral ground conductor which is typically used as a reference signal.
The basic principle of the working of a socket is that the contact with the pins of the chip or component is detected when a current is applied to the socket contacts. A voltage is then applied to the contacts which causes a change in the electrical characteristics of the component. The chip or component is then held in place while being soldered.
Sockets for ICs, transistors and other components come in many different sizes and shapes, depending on the particular application. Some sockets are designed for large components, such as Microprocessors, FPGAs or memory devices. Others are designed for highly integrated components, such as programmable logic/gate arrays. The sockets can also be designed to be customized for certain types of chips, so that special contacts and power supply pins can be included.
Sockets reduce the amount of work required for assembly, and are therefore favored by manufacturers of all types of electronic devices. They can also help improve the reliability of the device, since the pins are held firmly in place. In addition, sockets reduce the risk of component damage, since the contact force can be adjusted to the component\'s characteristics.
In summary, Sockets for ICs, transistors and other components are a critical component in the assembly of electronic components. They help reduce the risk of damage to components, reduce the amount of labor needed for assembly, and reduce the cost of the assembly.
The specific data is subject to PDF, and the above content is for reference
CONN SOCKET PGA GOLD
CONN IC DIP SOCKET ZIF 28POS TIN
CONNECTOR
CONN SOCKET LGA 1356LGA GOLD
CONN CAMERA SOCKET 32POS GOLD
CONN SOCKET TRANSIST TO-5 4POS