NXJ1S0303MC-R7 Power Supplies - Board Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters play a critical role in the modern world we live in. They are used to step up or step down voltage levels to give the desired voltage and current outputs. The NXJ1S0303MC-R7 is a DC-DC converter that is designed for a wide variety of applications.

The NXJ1S0303MC-R7 is a non-isolated DC-DC converter in a through-hole/through-hole package. It has an input voltage range of 9V to 36V and has an output voltage range of 0.55V to 15V. It is relatively small in size with a maximum power rating of up to 60W, making it ideal for use in a range of applications. It is designed to provide a regulated output voltage and current for loads up to 10A. It is extremely efficient with a typical efficiency of up to 87%.

The NXJ1S0303MC-R7 is widely used in industrial automation applications, consumer electronics, medical electronics, and other applications that require a regulated output voltage and current source. This DC-DC converter offers a temperature range of -40°C to +85°C, allowing it to be used in both commercial and industrial applications. The package size of the converter is 30.2mm by 20mm, making it capable of being integrated into small spaces.

The NXJ1S0303MC-R7 is designed to work in a wide range of temperatures, ensuring its reliability and is also protected against short circuit, overload, over voltage, and over temperature protection. The converter has a soft start circuit which eliminates the initial inrush current ensuring easier turning on with no transient. It is also able to support both constant voltage and constant current control.

The working principle of the NXJ1S0303MC-R7 is based on the conventional forward converter topology. It utilizes a single inductor and capacitor, whose charge and discharge cycles provide the desired voltage and current from the input to the output. The operation of the converter begins with the input voltage being stepped down by a Switch Mode Power Supply (SMPS). The SMPS will then switch the switching element on and off to transfer energy from the primary side, which is the input, to the secondary side, which is the output via the single inductor and single capacitor. This switching action is regulated by the control circuit which in turn is controlled by an internal IC.

The NXJ1S0303MC-R7 is an extremely capable DC-DC converter and can be used in a wide range of applications. Its small size, wide voltage input and output range, high efficiency, and reliable operation make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference