4233EA51K01723 RF/IF and RFID

Series:	--
Part Status:	Active
Type:	Fabric Over Foam
Shape:	Rectangle
Width:	1.000" (25.40mm)
Length:	17.230" (437.64mm)
Height:	0.598" (15.20mm)
Material:	Polyurethane Foam, Nickel-Copper Polyester (NI/CU)
Plating:	--
Plating - Thickness:	--
Attachment Method:	--
Operating Temperature:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RFI and EMI - Contacts, Fingerstock and GasketsRadio frequency interference (RFI) and electromagnetic interference (EMI) are two common forms of electrical noise that can interfere with the proper operation of electrical circuits. As a result, electrical components are designed and installed in a variety of shapes and sizes, with the aid of contacts, fingerstock and gaskets. The 4233EA51K01723 is a contact solution that is specifically designed to reduce RFI and EMI.The 4233EA51K01723 is an insulated fingerstock that is designed to reduce RFI and EMI. It is made from a combination of insulating material and a conductive material, which is meant to dissipate any radio frequency and electromagnetic interference. The 4233EA51K01723 is designed to be used as a conductor between two separate components in an electronic system, providing a larger area of coverage for RFI and EMI protection.The 4233EA51K01723 is designed to fit into tight electrical joints. It is constructed of a high-strength insulator and a conductive material that is designed to dissipate the heat produced during the operation of the component. The insulator also prevents potential RFI or EMI leakage from occurring between the components.The insulating material of the 4233EA51K01723 is designed to be thin enough to be flexible while providing the necessary insulation and strength to perform its function. The 4233EA51K01723’s conductive material is designed to provide good conductivity as well as being highly resistant to temperature variations. This combination of insulation and conductive material provides excellent RFI and EMI protection while providing good electrical conductivity.The 4233EA51K01723’s primary application field is in areas where electrical noise is a problem. It is used to reduce RFI and EMI in areas where electrical noise is high, such as near radio and television transmitters, in noisy computer systems, and in high power electrical systems.The working principle behind the 4233EA51K01723 is that it uses the conductive material to act as a shield against RFI and EMI. This helps to prevent the RFI and EMI from entering and interfering with the operation of the component. The combination of insulation and conductive material also helps to reduce the amount of heat generated during the operation of the component.The 4233EA51K01723 is a reliable and effective contact solution that can be used to reduce RFI and EMI. It is designed to provide a larger area of coverage while reducing the amount of heat generated during electrical operation. The insulating material used to construct the 4233EA51K01723 also ensures a reliable and effective solution for reducing these electrical noise sources.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description