Allicdata Part #: | ARF2704-ND |
Manufacturer Part#: |
ATS-1M1F-04DB2W |
Price: | $ 24.28 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | SMA JACK/PLUG ATTENUATOR 4DB 2W |
More Detail: | RF Attenuator 4dB ±0.5% 0Hz ~ 6GHz 50 Ohms 2W SMA ... |
DataSheet: | ATS-1M1F-04DB2W Datasheet/PDF |
Quantity: | 16 |
1 +: | $ 22.07520 |
10 +: | $ 19.92690 |
25 +: | $ 19.09150 |
50 +: | $ 17.89830 |
100 +: | $ 17.30170 |
250 +: | $ 16.34710 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators play a very important role in the functioning of various electronic devices, from amplifiers to oscilloscopes. ATS-1M1F-04DB2W, a digitally variable RF-attenuator, is an important part of this technology. This article will discuss the application field and working principle of ATS-1M1F-04DB2W.
The ATS-1M1F-04DB2W attenuator offers wide application potential in various fields, including communication, radar, industrial and instrumentation. It is primarily used in communication applications, where it provides a digital connection to attenuate signals. In addition, the attenuator is widely used in radar applications, where it helps to provide precise control of the signal strength. The ATS-1M1F-04DB2W attenuator also has various uses in industrial applications, for example it can be used to reduce the level of a signal before it enters an amplifier or measurement system. Finally, the attenuator can be used in instrumentation systems, as it helps to provide a precisely calibrated signal level for analysis.
The working principle behind ATS-1M1F-04DB2W RF attenuator is based on the concept of variable attenuation. This is achieved through the implementation of an electronic switch which is used to change the relationship between the source signal and the output signal. The electronic switch is driven by a digital control line, which is typically provided via a digital processor or microcontroller. When the digital control line is changed, the setting of the switch can be adjusted to vary the level of attenuation. This in turn can affect the output signal strength and also control the spectral mask of the signal.
The ATS-1M1F-04DB2W RF attenuator can be controlled using a variety of control signaling techniques, including serial, parallel, I2C and power supply switching. The control signal can be used to set the desired level of attenuation, as well as to adjust the frequency response and amplitude roll-off characteristics of the attenuator. In addition, the attenuator can be configured to provide any desired level of adjustment, from -40 dB to +40 dB.
The ATS-1M1F-04DB2W RF attenuator is a highly versatile component, which can be used to provide precise signal level control in a range of applications. It is easy to configure and can be used with various digital control signaling techniques. Additionally, the attenuator can be used to reduce the level of a signal before it enters an amplifier or measurement system, as well as to control the spectral mask of a signal. As such, the ATS-1M1F-04DB2W RF attenuator offers wide application potential in various fields.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...