M3933/14-13N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators play a crucial role in radio-frequency (RF) and microwave systems. One of the most common types of attenuators used in these systems is the M3933/14-13N, which is a fixed attenuator offering 10 dB of attenuation between operating frequencies of 10 MHz and 18 GHz. The M3933/14-13N has a nominal directivity of 14 dB or better, an input VSWR of 1.30 or better and an output VSWR of 1.25 or better.

The M3933/14-13N is typically used in RF and microwave systems where precise signal levels are required. It is primarily used in the laboratory, where its accuracy and repeatability makes it an ideal choice for radio frequency experiments. It is also used in wide range of applications, including mobile telecommunications, military applications, satellite communications, and cable television.

The M3933/14-13N attenuator works by reducing the signal level of an input signal, typically a radio frequency signal. It does this by using two different metals, one of which is an RF conductor and the other an electrical resistor or a capacitor. When the RF signal enters the attenuator, it passes through an electrical resistor or a capacitor, which in turn reduces the power of the signal. The signal then passes through an RF conductor, which reduces the signal again by reflecting or absorbing some of the signal’s energy. This reduces the strength of the signal so that it can be more accurately measured by laboratory instruments.

The M3933/14-13N attenuator is manufactured using two types of metals, namely aluminum and copper. The aluminum is used to form the components of the attenuator, while the copper is used to form the RF conductors. The Aluminum has excellent electrical conductivity, and is extremely lightweight. The copper, on the other hand, has excellent thermal properties and good electrical conductivity. These metals are then combined with an electrical resistor or a capacitor, depending on the attenuation required, to form the finished product.

The M3933/14-13N attenuator is simple and reliable, making it an ideal choice for any laboratory or commercial application. It has a wide operating range, and is suitable for a variety of different frequencies and applications. It can be easily adapted for use with either 50 or 75 ohm systems, making it one of the most versatile and reliable attenuators available in the market. With its low cost and accurate performance, it is an excellent choice for any radio frequency application.

The specific data is subject to PDF, and the above content is for reference