49-CBSA-0.75X1.75X0.4

Series:	40-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.400" (10.16mm)
Length - Overall:	1.750" (44.45mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

49-CBSA-0.75X1.75X0.4 RF Shields

RF Shields are used in a variety of applications, from protecting sensitive equipment to be shielded from environmental interference to providing additional shielding against large electromagnetic fields. RF Shields are designed to provide protection against the wide spectrum of radio frequency radiation. 49-CBSA-0.75x1.75x0.4 RF Shields are specifically designed to reduce the radiation emissions generated by high power equipment when a high spatial uniformity and low reflection requirement is necessary.

Application Field

The most common application for 49-CBSA-0.75x1.75x0.4 RF Shields is in the telecommunications industry, mainly for cellular base station antennas. These shields can also be used in other areas such as aviation, navigation, electronic surveillance, and military applications. Due to its high shielding efficiency and low reflection, the 49-CBSA-0.75x1.75x0.4 RF Shield is a popular choice for reducing interference in radio communication.

Working Principle

The working principle of the 49-CBSA-0.75x1.75x0.4 RF Shield is based on two factors: the shielding effect and its ability to reduce reflection. The shielding effect is accomplished through the use of a high permeability material, such as aluminum alloys, steel, and ferrite. This material is designed to absorb and reflect the radio waves that cause interference. The second factor, the reduction of reflection, is accomplished through the use of a reflective surface, which is typically coated with a highly absorptive material. This reduces the amount of radiation reflected back to the transmitting station. The effect of this reflective surface is greater when viewed from the side, thus causing the higher shielding efficiency.

Conclusion

49-CBSA-0.75x1.75x0.4 RF Shielding is one of the most effective ways to reduce interference in radio communication. This type of RF Shielding is ideal for telecommunications applications, as it is designed to reduce the radiation emissions generated by high power equipment while providing a high spatial uniformity and low reflection. The unique combination of the shielding effect and reflective surface make the 49-CBSA-0.75x1.75x0.4 RF Shield an ideal choice for reducing interference.

The specific data is subject to PDF, and the above content is for reference