Allicdata Part #: | 58-CBSA-1.0X4.75X0.5-ND |
Manufacturer Part#: |
58-CBSA-1.0X4.75X0.5 |
Price: | $ 15.67 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 58 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.000" (25.40mm) X 4.750... |
DataSheet: | 58-CBSA-1.0X4.75X0.5 Datasheet/PDF |
Quantity: | 1000 |
21 +: | $ 14.24250 |
Series: | 50-CBS |
Packaging: | Bulk |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.500" (12.70mm) |
Length - Overall: | 4.750" (120.65mm) |
Width - Overall: | 1.000" (25.40mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
58-CBSA-1.0X4.75X0.5 is an RF shield. It is used to block electromagnetic interference (EMI) from entering or leaving electronic devices and systems. An RF shield is generally composed of conductive metal sheets, which are designed to absorb or reflect unwanted signals. RF shields are essential components of many electronic applications, such as communications, automotive, consumer electronics, and medical applications. This article will discuss the application field and working principle of the 58-CBSA-1.0X4.75X0.5 RF shield.
Application Field
The 58-CBSA-1.0X4.75X0.5 RF shield is suitable for a wide range of applications. It is widely used in military, aerospace, and industrial applications. It can also be used in automotive and consumer electronics applications. The shield\'s ability to block electromagnetic interference from entering or leaving electronic devices makes it an effective shielding solution for these applications.
In military and aerospace applications, the shield can be used to protect electronic systems from external interference. It can also be used to prevent interference from other electronic devices from entering the system. In automotive applications, electronic components such as sensors and actuators require protection from electro-magnetic interference. The 58-CBSA-1.0X4.75X0.5 can provide this protection, helping to ensure the reliability of these systems. In consumer electronics, the shield can be used to protect mobile devices and other portable electronics from interference.
Working Principle
The working principle of an RF shield is based on the concept of electromagnetic shielding. An RF-shielded enclosure is made from conductive material, typically metal such as aluminum or copper. This material is designed to absorb or reflect incoming electromagnetic waves, preventing them from entering the shielded area. This shielding effect is achieved by creating a Faraday cage, which is a closed cavity made of conducting metal. The metal absorbs or reflects the incoming electromagnetic waves, preventing them from entering the protected area.
The 58-CBSA-1.0X4.75X0.5 is designed to be highly effective in blocking unwanted EMI. The shield is constructed using a layer of conductive material, such as zinc or copper, which absorbs or reflects the incoming signals. The shield is also designed with a series of metal meshing to further reduce the amount of EMI entering the protected area. In addition, the shield has an advanced design that helps to reduce RF leakage to a minimum.
Conclusion
The 58-CBSA-1.0X4.75X0.5 RF shield is suitable for a wide range of applications. It is used to block unwanted electromagnetic interference from entering or leaving electronic devices and systems. The shield is constructed using conductive material and a series of meshing to ensure effective EMI blocking. The advanced design of the shield helps to reduce RF leakage to a minimum.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...