Allicdata Part #: | VI-2V3-EX-B1-ND |
Manufacturer Part#: |
VI-2V3-EX-B1 |
Price: | $ 182.88 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 24V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 24V 3.... |
DataSheet: | VI-2V3-EX-B1 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 166.25100 |
Current - Output (Max): | 3.13A |
Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 24V |
Voltage - Input (Max): | 36V |
Voltage - Input (Min): | 9V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to VI-2V3-EX-B1 DC DC Converters
DC-DC converters are electronic devices which convert direct current (DC) from one voltage level to another. They are used in various power supply applications such as laptop computers, cell phones, automotive systems, industrial motor drives, solar inverters, and many more. The VI-2V3-EX-B1 is a specific model of DC-DC converter from Vicor Corporation, a leading provider of high-performance power supplies and components.
Application Field of VI-2V3-EX-B1
The VI-2V3-EX-B1 DC-DC converter can be used in a variety of applications, ranging from industrial control systems to consumer electronics. In industrial settings, the VI-2V3-EX-B1 is ideal for powering process controllers, digital logic, and low-voltage/high-current loads. In consumer electronics, it can be used for laptops, mobile phones, tablets, digital cameras, and many other devices.
Working Principle of VI-2V3-EX-B1
The working principle of the VI-2V3-EX-B1 DC-DC converter is based on the transformer. At first, it receives an unregulated input voltage, which is then converted to an alternating current (AC) signal. The AC signal is then passed through a transformer, which increases or decreases the voltage depending on which wires are connected. The resulting voltage is then rectified back to a DC signal using a rectifier, and finally regulated using a control circuit. This DC signal is then used to power the load device.
The VI-2V3-EX-B1 is an isolated DC-DC converter meaning that the input and output are electrically isolated from each other, which prevents any dangerous current from passing between the input and output. It is also designed to be highly efficient, making it an ideal choice for many power supply applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...