Allicdata Part #: | P910W-3TR-ND |
Manufacturer Part#: |
ERG-3SJ911A |
Price: | $ 0.05 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 910 OHM 3W 5% AXIAL |
More Detail: | 910 Ohms ±5% 3W Through Hole Resistor Axial Flame ... |
DataSheet: | ERG-3SJ911A Datasheet/PDF |
Quantity: | 6000 |
1500 +: | $ 0.04694 |
3000 +: | $ 0.04401 |
7500 +: | $ 0.03961 |
10500 +: | $ 0.03873 |
37500 +: | $ 0.03741 |
75000 +: | $ 0.03668 |
Series: | ERG |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 910 Ohms |
Tolerance: | ±5% |
Power (Watts): | 3W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±300ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.217" Dia x 0.591" L (5.50mm x 15.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are one of the most widely used electronic components, and ERG-3SJ911A plays a major role in this domain. It is a large power, low inductance, SMD resistor that has an extended foothold in the electronics market, including air traffic control, navigation, communication and space acceleration control systems.
The ERG-3SJ911A utilizes thermoplastic insulation, a ceramic substrate, nickel barrier, and silver palladium alloy terminals. It provides a wide variety of resistance values and is rated up to a peak handling power of 70 Watts and an operating power of 25 Watts. The resistor also contains a thermal fuse that will blow and effectively shut down the circuit in the event of an overload.
Due to its highly reliable, robust design and thermal performance, ERG-3SJ911A is mostly used in condition control, aerospace, aviation and other fields where accuracy and reliability are of the utmost importance. It ensures minimal power dissipation and heating due to its innovative power ratings, temperature cycle qualities and thermal resistance.
The ERG-3SJ911A employs an air gap structure between the resistive element and the ceramic substrate which makes its resistance exceptionally stable with temperature. This ceramic air gap also minimizes self-heating by increasing the thermal impedance and allows for a much higher temperature coefficient than other resistors.
The application fields of the ERG-3SJ911A are quite broad and varied. Most commonly, it is used in industrial process control, car navigation systems and air traffic control devices where its resistive properties are highly effective and accurate. In addition, its use in power supply circuits, telecommunication applications, instrumentation and detection equipment, medical equipment and solar energy systems has been found to be advantageous.
In addition to its wide range of application, the working principle of the ERG-3SJ911A can be divided into three categories: temperature coefficient, resistance value accuracy, and thermal time constant. Its temperature coefficient is the ratio between a change in resistive value with respect to temperature changes. The resistance value accuracy denotes the precision of resistance value, and the thermal time constant is the ability of the resistor to dissipate heat energy.
The ERG-3SJ911A\'s temperature coefficient design eliminates most of the thermal drift due to changes in temperature. This means that the resistor will not shift values in response to temperature changes, providing improved accuracy and reliability. Furthermore, its small size and efficient construction allow for increased circuit board density and simplified component placement.
The ERG-3SJ911A also features excellent noise immunity, which allows for more reliable signal transmission and increases the frequency response. This resistance to noise interference is extremely vital in applications in which accuracy and reliability are paramount. This makes it an especially suitable choice for many telecommunications, navigation, aviation and aerospace systems.
Finally, the combination of superb temperature stability and high temperature coefficient make this resistor an ideal choice for temperature-controlled equipment. Also, its ceramic substrate is more resistant to shocks and vibration, making it the ideal choice for equipment placed in harsh environments, or in locations where long-term performance is required.
In conclusion, the ERG-3SJ911A plays a major role in the electronics industry, especially in the domain of Through Hole Resistors. With its high temperature stability, resistance value accuracy, thermal time constant and noise immunity, it is ideally suited for applications ranging from air traffic control and communication to solar energy systems and medical equipment. Highly reliable and robust design and thermal performance guarantee that it will remain a major player in the electronics industry for many years to come.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...