Allicdata Part #: | P43W-2TR-ND |
Manufacturer Part#: |
ERG-2SJ430A |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | RES 43 OHM 2W 5% AXIAL |
More Detail: | 43 Ohms ±5% 2W Through Hole Resistor Axial Flame P... |
DataSheet: | ERG-2SJ430A Datasheet/PDF |
Quantity: | 15000 |
3000 +: | $ 0.02176 |
6000 +: | $ 0.01978 |
15000 +: | $ 0.01846 |
30000 +: | $ 0.01754 |
75000 +: | $ 0.01718 |
150000 +: | $ 0.01681 |
Series: | ERG |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 43 Ohms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Metal Oxide Film |
Features: | Flame Proof, Safety |
Temperature Coefficient: | ±350ppm/°C |
Operating Temperature: | -55°C ~ 235°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.157" Dia x 0.472" L (4.00mm x 12.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The development of high-power semiconductor components has led to the rapid development of power electronics technology, gradually replacing traditional iron-core components. With the development of technology, more and more customers require higher energy and efficiency, so the ERG-2SJ430A through hole resistors are becoming more and more popular. The ERG-2SJ430A is a two-terminal device, mainly used for limiting current, protecting power sources and electromagnetic interference. It also has the characteristics of fast response speed, ultra-low resistance value, low power consumption, fast energy storage and recovery, and high reliability.
There are many application fields of ERG-2SJ430A through hole resistors. In the automotive industry, it is widely used in ultrasonic detection, drive control, EGR control valves, voltage regulators, electric control equipment, electronic fuel injection systems, etc. Besides, in the industrial control industry, it is mainly used for the characteristic detection, adjustable signal distortion, voltage stabilization and power limit of power circuits, eliminating electromagnetic interference, and forming an over-current protection system. In addition, it also has a wide range of applications in the consumer electronics industry, such as charging technology for mobile phones and tablet computers.
The working principle of ERG-2SJ430A through hole resistors is based on electron flow. Its basic structure consists of fixed resistors connected in series between two ports. As a result, a current is created through the resistor when the energy is released by the electron flow. The magnitude of the current depends on the resistance value of the resistor, and the volume will become smaller as the resistance value increases. Additionally, the voltage at the two ends of the resistor will decrease, and the heat generated by the current will be further reduced.
In order to ensure the highest performance of the ERG-2SJ430A through hole resistors, three requirements must be satisfied: temperature stability, low voltage drop, and high power dissipation. Temperature stability requires that the resistance of the resistor remains stable over a wide range of temperatures, so that the current passing through the resistor is not affected by environmental temperature. The low voltage drop requirement enables the device to withstand a higher current without a significant power loss. Finally, the high power dissipation enables the device to dissipate energy more effectively while operating at high temperatures.
In conclusion, the ERG-2SJ430A through hole resistors are suitable for many applications in a variety of industries, such as automotive, industrial control, and consumer electronics. They have high temperature stability, low voltage drop, and high power dissipation, making them an ideal choice for applications needing to withstand larger currents. In addition, their working principle of current movement through electrons, makes them even more reliable and safe to use.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...