CMF55330K00GLEA

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	330 kOhms
Tolerance:	±2%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±150ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistor

Through hole resistors are electronic components which possess a specific and stable resistance value over a given range of operating parameters. They are usually used for reducing current overload, providing static current sources, adjusting amplifier feedback, and providing voltage reference points. A through hole resistor consists of two leads welded into the body of the component. Resistance is created by a thin film or powder which is deposited on the leads, or by a winding of wire which wraps around the leads.

Application Fields

Through hole resistors are most commonly used in amplifiers, radios, electronic circuits, and oscillators. Resistors are important components in amplifier circuits since they make sure the amount of current going through the component stays the same. Without resistors, too much current will flow through the circuit, and it can damage or destroy the components. Resistors play an equally important role in radio circuits because they increase the strength of the radio signal, help filter out any excess noise, and enable the radio to receive a signal accurately. Through hole resistors can also be used in oscillators for creating a sequence of periodic electrical signals such as clocks or integrated chips. By changing the resistance value, different periodic outputs can be created. In addition, they are used in bridges which precisely measure electrical potentials and currents.

Functional Principles of CMF55330K00GLEA

CMF55330K00GLEA is a through hole thick film chip resistor which is made of several layers of metal fibers and conductive materials. It is available with resistance values from 5 to 10,000 ohms. The resistor has two leads which are connected to the resistor body with a high-temperature solder. This allows for even heat distribution and ensures that the resistor stays properly connected. The resistor works by reducing the amount of current which flows through a circuit. This is done by using the principle of Ohm’s Law, which states that the current through a conductor is directly proportional to the voltage applied to it, and inversely proportional to the resistance. As the current passes through the resistor, it encounters resistance which reduces the current flow and lowers the amount of energy the circuit requires.

Conclusion

Through hole resistors are useful and widely used components in electronics and electrical engineering, and CMF55330K00GLEA is a popular through hole resistor which is widely used in many applications. It is a good choice for reducing current overload, providing static current sources, adjusting amplifier feedback, and providing voltage reference points due to its high precision and reliable performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description