MFP50SBRD52-36K1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are amongst the oldest and simplest of electronic components and are found in a vast array of circuits and applications. A Through Hole Resistor can be soldered directly to a Printed Circuit Board (PCB) and is used to create a circuit connection between two conductive elements. The MFP50SBRD52-36K1 is a Through Hole Resistor specifically designed for high power applications. Its main features make it an ideal choice for a number of demanding industrial applications.

The MFP50SBRD52-36K1 Through Hole Resistor consists of a high-grade ceramic substrate that is pre-doped with a special silicon-based semiconductor material. This substrate is then coated with a layer of metal and treated to achieve the desired electrical and thermal characteristics. The result is a Through Hole Resistor that can accommodate a wide range of power levels while maintaining a very low impedance.

The MFP50SBRD52-36K1 is capable of handling temperatures up to 200°C and can be used in low noise, lower resistance applications such as motor drives, high power switching supplies and high frequency voltage stabilizers. It is an ideal choice for those applications where reliable performance is required without the additional cost of mounting and soldering. The thermal characteristics of the MFP50SBRD52-36K1 make it suitable for use in environments where very high temperatures are expected such as in extreme environments.

The working principle of the MFP50SBRD52-36K1 is relatively straightforward. It utilizes the basic principle of resistive heating to create an ohmic resistance that is used to limit current flow between two conductive elements. To achieve the desired ohmic value, a specific amount of electrical energy is applied to the two conductive elements. The resistance created by this application of energy is determined by the temperature of the resistor and the material used to create the resistor. In the case of the MFP50SBRD52-36K1, the ceramic material and heat treatment provide an exact ohmic value that is calibrated to create the desired resistance.

The MFP50SBRD52-36K1 Through Hole Resistor is a highly reliable and efficient component for use in high power applications. Its high temperature capabilities and low noise resistance make it suitable for a wide range of applications such as motor drivers and voltage stabilizers. Additionally, its relatively simple working principle makes it an ideal choice for designers in need of a quick and easy solution. When combined with the low cost and easy installation of a Through Hole Resistor, the MFP50SBRD52-36K1 is an ideal choice for applications requiring reliable performance without the additional cost of mounting and soldering.

The specific data is subject to PDF, and the above content is for reference