V72C24T150BF

Series:	MICRO
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	43V
Voltage - Input (Max):	110V
Voltage - Output 1:	24V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	6.25A
Power (Watts):	150W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OVP, UVLO
Operating Temperature:	-40°C ~ 100°C
Efficiency:	84.9%
Mounting Type:	Through Hole
Package / Case:	Quarter Brick
Size / Dimension:	2.28" L x 1.45" W x 0.54" H (57.9mm x 36.8mm x 13.7mm)
Base Part Number:	V72C24T150

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to V72C24T150BF DC DC Converters

DC-DC converters are used to convert one DC voltage to a different voltage in a process known as voltage regulation. The V72C24T150BF converter is one of the many voltage regulators available in the market. This converter is ideal for converting DC signals from 12 V to 24 V and can provide high-current output up to 2.5 A.

Benefits of V72C24T150BF DC DC Converters

The V72C24T150BF converter has several benefits that make it ideal for numerous applications. These benefits include:

• High efficiency – V72C24T150BF converter has an efficiency of up to 90%, meaning there is less power loss compared to other converters. Additionally, this high efficiency reduces the amount of heat generated.
• Compact size and light weight – The V72C24T150BF converter has a small form factor and is light-weight, making it an ideal choice for applications where space is at a premium.
• High noise immunity- The V72C24T150BF converter is designed to be highly immune to external noise and interference.
• Wide input voltage range- The V72C24T150BF converter can accept a wide range of input voltages, from 5.5 V to 40 V.

Applications of V72C24T150BF DC DC Converters

V72C24T150BF converters are designed primarily for converting 12 V signals to 24 V signals. Because of its high efficiency and low power loss, it is ideal for applications requiring high-current outputs, such as automotive, industrial, and consumer electronics. In addition, the V72C24T150BF converter can be used in RV, marine, and solar battery charging applications.

Working Principle of V72C24T150BF DC DC Converters

The V72C24T150BF converter uses a buck mode control approach to regulate and convert DC voltage. This approach uses an Inductor and an energy storage device, usually a capacitor, and switches from Buck and Boost mode to adjust the output voltage. This buck-boost process enables the converter to accept wide input voltage without compromising the output voltage.When the voltage reaches the desired level, a feedback circuit turns off the switching transistor and stops the buck-boost process. This enables the output voltage to remain at the desired level. When the output voltage drops due to a load change, the feedback voltage initiates the switching process again, and the input voltage is adjusted until the output voltage reaches the desired value.

Conclusion

The V72C24T150BF converter is an ideal voltage regulator for applications requiring high-current output, such as automotive, industrial, and consumer electronics. Its high efficiency, low power loss, and noise immunity features make it an effective solution for voltage regulation. Furthermore, its buck-boost control approach allows it to accept wide input voltages without compromising the output voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description