V28C36H100BG2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

A DC-DC converter is a device that converts a DC input voltage to a different DC output voltage. It is commonly used in portable electronic devices, such as cell phones and laptop computers, to provide an easily regulated power supply to electrical components. DC-DC converters are also used in applications where the DC input voltage is much higher than the DC output voltage, such as a photovoltaic system, or a DC motor. In these applications, the DC-DC converter serves to reduce the input voltage to the desired level.

V28C36H100BG2 Application Field and Working Principle

The V28C36H100BG2 is a DC to DC converter module manufactured by Vicor Corporation. It is a non-isolated module, meaning the input and output are electrically connected, though it does provide a minimum of 1000V of electrostatic discharge protection. The V28C36H100BG2 is capable of providing up to 36 watts of output power with input voltages ranging from 4.5 to 18 volts. It is typically used for high power applications, where the output voltage needs to be reduced. For example, this module can be used to power an LED array from a 12 volt DC power supply.

The working principle of the V28C36H100BG2 is based on voltage-step-down technology. This technology is used to reduce the output voltage by “stepping-down” the input voltage. This is done by using an inductor, which functions to store energy during the first half of the switching cycle, and to release energy during the second half of the cycle. The energy is transferred from the input to the output during each cycle, allowing for a smooth transition. The output voltage is determined by the current flowing through the inductor and the capacitor. The more current, the lower the voltage. This type of converter is highly efficient and has very low output noise, making it suitable for powering electronic devices.

In addition to LED lighting applications, the V28C36H100BG2 module can be used in many other applications, such as powering DC motors, PLCs, as well as embedded systems. It is also often used in remote control systems, where a wireless device needs an accurate, regulated power supply. The V28C36H100BG2 module is also a reliable choice for battery charging applications, due to its high efficiency and wide input voltage range.

In conclusion, the V28C36H100BG2 is a reliable and efficient DC to DC converter module, capable of providing up to 36 watts of output power with input voltages ranging from 4.5 to 18 volts. It is typically used to reduce the voltage of a power supply, such as a 12 volt DC power supply, in order to power LED arrays or other high power applications. It is also suitable for battery charging, remote control systems, and embedded systems.

The specific data is subject to PDF, and the above content is for reference