MB4S-TP Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, also called rectifiers, are solid state devices used to convert alternating to direct current (AC to DC). A bridge rectifier is an arrangement of diodes used to convert alternating current (AC) to direct current (DC). The four-diode bridge rectifier, also referred to as the MB4S-TP, is widely used for its low cost and simple full-wave rectification operation. It is especially useful for applications such as power supplies, AC to DC conversion, voltage doubler applications, and other DC power supply related projects.

The MB4S-TP bridge rectifier consists of four diodes arranged in a bridge formation. The two outer diodes are connected in series and provide the full-wave rectification, while the two inner diodes function as charge pumps and act as voltage multipliers. The two outer diodes are called the AC or anode input, while the two inner diodes are called the cathode output.

The MB4S-TP has several advantages over other four-diode rectifiers, such as the 2-diode, 4-diode and 4-diode double-ring. It has the capability of providing a full-wave output from either a single-phase or multiphase AC input. It also has a low output ripple and does not require an additional capacitor for added filtering. It also eliminates the need for four individual current paths, making it more suitable for a wide range of applications requiring low power consumption. In addition, the MB4S-TP has a more efficient rectification cycle compared to the other rectifiers.

The working principle of the MB4S-TP bridge rectifier is simple. When AC voltage is applied to the input diodes, one diode conducts in each direction, allowing the two AC inputs to be combined in series. This creates a full-wave rectification effect, where the current is rectified in both directions, effectively making it a DC output. The output voltage is equal to 1.414 times the average of the input voltage. The output voltage is also usually lower than the peak input voltage, due to the losses incurred during the rectification process.

The MB4S-TP bridge rectifier is widely used in applications where a reliable, low cost and efficient DC output is needed, such as power supplies, inverter circuits, solar cell charging, AC voltage doubling, and DC-to-AC inverters. It is also preferred for its reliability and low power consumption, which makes it suitable for applications with limited power resources.

The MB4S-TP bridge rectifier is a low power, efficient rectifier suitable for many AC to DC conversion and voltage doubling applications. It can be easily integrated into power supply circuits, inverter circuits and AC voltage doubling circuits, providing a reliable, low-cost and efficient DC output. Its simple operation and low power consumption makes the MB4S-TP bridge rectifier an invaluable tool for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference