Allicdata Part #: | L-15W16NKV4E-ND |
Manufacturer Part#: |
L-15W16NKV4E |
Price: | $ 0.06 |
Product Category: | Inductors, Coils, Chokes |
Manufacturer: | Johanson Technology Inc. |
Short Description: | FIXED IND 16NH 600MA 80 MOHM SMD |
More Detail: | 16nH Unshielded Wirewound Inductor 600mA 80 mOhm M... |
DataSheet: | L-15W16NKV4E Datasheet/PDF |
Quantity: | 1000 |
4000 +: | $ 0.04876 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | Wirewound |
Material - Core: | Ceramic |
Inductance: | 16nH |
Tolerance: | ±10% |
Current Rating: | 600mA |
Current - Saturation: | -- |
Shielding: | Unshielded |
DC Resistance (DCR): | 80 mOhm Max |
Q @ Freq: | 60 @ 500MHz |
Frequency - Self Resonant: | 3.5GHz |
Ratings: | -- |
Operating Temperature: | -40°C ~ 125°C |
Inductance Frequency - Test: | 100MHz |
Mounting Type: | Surface Mount |
Package / Case: | 0805 (2012 Metric) |
Supplier Device Package: | 0805 (2012 Metric) |
Size / Dimension: | 0.079" L x 0.049" W (2.00mm x 1.25mm) |
Height - Seated (Max): | 0.055" (1.40mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fixed Inductors
Fixed inductors are electronic components made from coiled wire and core that is made from ferrite, iron, air and other materials. These inductors have the ability to store energy in the form of an electric or magnetic field. Inductors are used in a wide range of electronic circuits for a variety of applications such as filters, impedance matching, and power supplies. Fixed inductors typically come in two different types: polarised and non-polarised.
L-15W16NKV4E Application Field and Working Principle
The L-15W16NKV4E is a fixed inductor that is intended for use in applications such as power supplies, voltage regulators, and distortion compensation circuits. It has an inductance of 15 uH and a maximum voltage rating of 16V. The package includes four (4) pins.
The inductor works by taking current in and storing energy in the form of a magnetic field. This creates a back-EMF, which is the voltage that is generated when the current is removed. This back-EMF is generated when the inductor is subjected to a steady-state current flow. The inductor will resist changes in the current flow, and this resistance is measured in terms of inductance.
When the inductor is subjected to a changing current the back-EMF that is produced changes direction and the magnitude of the voltage can reach very high levels. This effect is known as inductive “kick-back” and can be very dangerous. To limit the amount of back-EMF a device known as a diode is connected in series with the inductor in some applications.
The primary applications of the L-15W16NKV4E fixed inductor are in power supplies, voltage regulators and distortion compensation circuits. The inductor can also be used in high-frequency circuits, filter circuits, impedance matching circuits, communication circuits, and switching power supplies.
Because inductors have an effect on the flow of current, they can be used to filter signals. This can be done by connecting a series of inductors in different orientations to create a low-pass, high-pass or bandpass filter. This is commonly used in audio applications, such as amplifiers and equalizers, to reduce or enhance certain frequencies. The L-15W16NKV4E is often used as a component in passive audio filters.
The L-15W16NKV4E is a high quality inductor that is designed for use in a wide range of applications. It has a maximum current rating of 0.9A and a temperature range of -40° C to +85°C. Its four pins provide good stability in the circuit and it is durable enough to perform well in harsh conditions.
The specific data is subject to PDF, and the above content is for reference
FIXED IND 10UH 590MA 350 MOHM10H Unshiel...
FIXED IND 22NH 1.4A 70 MOHM SMD22nH Unsh...
FIXED IND 13NH 600MA SMD13nH Unshielded ...
FIXED IND 680UH 210MA 4.6 OHM680H Unshie...
FIXED IND 470UH 1.3A 280 MOHM TH470H Uns...
FIXED IND 8.2UH 165MA 2.2 OHM TH8.2H Uns...