4-2176075-4 Inductors, Coils, Chokes

Series:	3640, Sigma Inductors
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Thin Film
Material - Core:	--
Inductance:	5.6nH
Tolerance:	±2%
Current Rating:	130mA
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	1.8 Ohm Max
Q @ Freq:	8 @ 500MHz
Frequency - Self Resonant:	4GHz
Ratings:	--
Operating Temperature:	--
Inductance Frequency - Test:	500MHz
Mounting Type:	Surface Mount
Package / Case:	0201 (0603 Metric)
Supplier Device Package:	0201
Size / Dimension:	0.024" L x 0.012" W (0.60mm x 0.30mm)
Height - Seated (Max):	0.011" (0.28mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors (4-2176075-4) are electronic components that are used to store energy in the form of a magnetic field. Often referred to as “chokes”, these components have a wide range of uses in the electronics industry. Typically, fixed inductors are used in applications such as filters, smoothing, energy-storage, and other important circuit functions.In today’s complex electronic designs, fixed inductors are used in a wide variety of circuits with very specific requirements. These components are manufactured to meet highly-specific engineering requirements and to provide the best possible performance for a given application. This article will provide an overview of the application field and working principle of 4-2176075-4 fixed inductors.

Application Field

Fixed inductors have a wide range of applications. The most common of these applications are in filters, smoothing, energy-storage, and other important circuit functions. In filters, fixed inductors are typically used to create low-pass, high-pass, band-pass, and band-stop filters. Low-pass and high-pass filters are used in many electronic applications. They are used to block or pass frequencies above or below a certain frequency cutoff, depending on the filter design. Fixed inductors are also used in smoothing applications, such as DC-DC converters. These converters convert a DC voltage to a different DC voltage and can be used to step-up or step-down voltages. The inductor in these applications helps reduce the ripple and improve the regulation of the converter.Finally, fixed inductors are also used for energy-storage applications. These includes DC-DC converters, as well as energy-storage capacitors, batteries, and other storage elements. The inductor helps to store energy that can then be discharged as needed.

Working Principle

At a basic level, fixed inductors work by storing energy in the form of a magnetic field. This magnetic field is generated when electric current passes through a conductor, such as a wire, coil, or ferrite core. When the current is cut off, the magnetic field collapses, sending a current in the opposite direction. This current is known as an “induced current”. The strength of the induced current is proportional to the amount of electric current that was used to generate the magnetic field. This is known as the “inductance” of the inductor, and is measured in henries (H). The higher the inductance, the greater the amount of energy that can be stored. The inductance of 4-2176075-4 fixed inductors is measured in microhenries (uH). This is a measure of the inductor’s ability to store and regulate energy over a wide range of frequencies.

Conclusion

Fixed Inductors (4-2176075-4) are commonly used in electronic designs and have a wide range of applications. These components work by storing energy in the form of a magnetic field and can be used for filtering, smoothing, energy-storage, and many other important functions. The ability of the inductor to store and regulate energy is measured in microhenries.

The specific data is subject to PDF, and the above content is for reference