SP1008-393H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the SP1008-393H, are used in a variety of circuits to perform a variety of functions. They are most commonly used as chokes or power-line filters to reduce electrical noise, as well as in voltage regulators and RF filters, particularly in high-frequency applications. They are also used in switching power supplies for voltage step-down, capacitor charge storage, and current smoothing.

The SP1008-393H is an axial leaded, ferrite core inductor. It is a high-thermal-resistant, low-profile device. It has a 393nH inductance, 10uH max. DC resistance, and a 1MHz resonance frequency. Its maximum DC current rating is 32.0A.

The working principle of an inductor is based on Faraday’s Law of Induction, which states that when a current flowing through a conductor is changed, a magnetic field is formed around it. This magnetic field interacts with the current, inducing a voltage in the conductor. The size of the voltage depends on the rate or speed at which the current is changing (the rate of change of the magnetic field). The magnitude of the inductance is thus a measure of the conductor’s resistance to changes in the current.

The SP1008-393H utilizes ferrite material in its core, which is a magnetic material with a high permeability. This high permeability makes it effective at stepping up the inductance, allowing for higher inductance ratings than comparable devices made with iron cores. The inductance of the SP1008-393H is relatively low for an inductor of its size, limiting its application to high frequency switching and current filtering.

Inductors are commonly used in circuits to adjust the amplitudes of signals and to dampen or filter out unwanted noise or interference. In their most basic form, they are used to pass signals with a desired or predetermined frequency. They are also used to block high-frequency signals and to allow low-frequency signals to pass. For example, in audio systems, inductors are often used in combination with capacitors to create low-pass or high-pass filters for controlling audio frequencies.

In addition, the SP1008-393H can be used to step down or regulate high input voltages to a lower output voltage. The inductor is wired in series with the voltage source. As current passes through the inductor, the inductor’s inductive reactance opposes the flow of current, resulting in a drop in voltage. This voltage drop can be used to regulate the output voltage to the desired level.

The SP1008-393H is an ideal choice for a variety of circuits in which high inductance ratings and high thermal resistance are required. Its small size and low profile make it well suited for high-density, space sensitive applications. It can be used for RF filtering, voltage regulation, current smoothing, and noise reduction in a variety of applications.

The specific data is subject to PDF, and the above content is for reference