Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that are used to generate repeating signals of specified frequency, amplitude and phase. ABLNO-V-80.000MHZ-T oscillators are some of the most commonly used oscillators in the commercial and scientific fields. They are used in a variety of applications, including radio communication, test and measurement, industrial, and medical applications. In this article, we will discuss the application fields and working principle of ABLNO-V-80.000MHZ-T oscillators.

ABLNO-V-80.000MHZ-T oscillators are widely used in radio communication applications. They can be used to generate RF and microwave signals for use in modulating an audio signal, for transmission over a radio frequency link, or for generation of a carrier angular signal in a radar system. In addition, they are used for generating frequency references for transmitters and receivers, and for locking other oscillators to precise frequencies.

In test and measurement applications, the accuracy and long-term stability of ABLNO-V-80.000MHZ-T oscillators makes them a suitable choice for RF signal generators and sweep generators. They are also used in audio test and measurement systems, such as test signal generators and tone generators.

ABLNO-V-80.000MHZ-T oscillators are also used in industrial applications such as motor controllers, process controllers and other control systems. In addition, they are used in medical applications, such as in ultrasound and imaging systems.

The working principle of ABLNO-V-80.000MHZ-T oscillators is based on the oscillatory phenomenon of an LC circuit, also referred to as a tuned circuit. It consists of an inductor and a capacitor, which are connected in series or parallel to form an electrical network. When a DC voltage is applied to the circuit, the inductor and capacitor start to store energy and alternately discharge it into each other. This energy exchange between them causes an oscillating current in the circuit. The frequency of the oscillation depends on the values of the inductor and capacitor. By carefully selecting the values of the components, the frequency of the oscillation can be precisely controlled.

In ABLNO-V-80.000MHZ-T oscillators, the LC circuit is connected to an amplifier which amplifies the oscillating current. This amplified signal is then fed back to the resonant circuit, which further amplifies the oscillation. This feedback loop allows the oscillator to maintain a stable oscillation at the desired frequency.

In summary, ABLNO-V-80.000MHZ-T oscillators are used in a variety of applications, including radio communication, test and measurement, industrial, and medical applications. Their working principle is based on the oscillatory phenomenon of an LC circuit, which is connected to an amplifier and fed back to the resonant circuit. This feedback loop allows the oscillator to maintain a stable oscillation at the desired frequency.

The specific data is subject to PDF, and the above content is for reference