515CDA25M0000AAGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are widely used in a variety of electronic fields to create sine wave signals. Among these is the 515CDA25M0000AAGR oscillator, which is used for the generation of high-precision sine wave signals. This oscillator is ideal for use in low-noise communication systems, precision timing control devices, and other precision systems that require clean, accurate sine wave signals.

The 515CDA25M0000AAGR oscillator is based on a Feedback Op Amp design that uses two independent feedback circuits. The first feedback circuit drives the op-amp\'s output to produce a sine wave. The second feedback circuit controls the amplitude of the sine wave. The output frequency of the oscillator is determined by the feedback circuits and the value of the components used.

This oscillator is designed to operate over a wide temperature range and is capable of driving both high-speed digital and wideband analog signals. The output waveform is clean and stable; in addition, this oscillator is highly immune to environmental noise. A wide range of outputs are available, from low frequencies (2 Hz) up to high frequencies (5 MHz).

The 515CDA25M0000AAGR oscillator is not only used for the generation of sine wave signals, but it is also used for the generation of precision time delay signals. The oscillator is capable of producing signals at the exact frequency needed to meet the exact timing requirements of any given circuit. This oscillator is ideal for use in timing control circuits, data communication systems, frequency synthesis circuits, and even clock recovery and frequency division units.

The 515CDA25M0000AAGR oscillator is a versatile device that is suitable for a wide range of applications. In addition to its use in precision timing control systems, the oscillator can also be used for the generation of precise clock signals for clocking digital or analog systems. The oscillator is also suitable for use in frequency synthesis circuits that require stable and precise frequency output.

The 515CDA25M0000AAGR oscillator is a reliable and cost-effective solution for those looking for a high-precision sine wave output. The feedback op-amp design employed ensures that the output waveform is both consistent and stable, while at the same time the wide range of frequencies available makes the oscillator suitable for a variety of applications. In addition, its temperature range and its immunity to environmental noise make the oscillator an ideal choice for use in precision timing and frequency synthesis systems.

The specific data is subject to PDF, and the above content is for reference