MDM-BT-37TE-SJS Connectors, Interconnects

Series:	MDM
Part Status:	Active
Lead Free Status / RoHS Status:	--
Accessory Type:	One Piece Backshell
Number of Positions:	37
Cable Type:	Round
Cable Exit:	180°
Shielding:	Shielded
Material:	Aluminum
Plating:	Electroless Nickel
Hardware:	--
Features:	Spring Clip, Mating Screws
Color:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MDM-BT-37TE-SJS Application Field and Working Principle

MDM-BT-37TE-SJS is manufactured by Connector-Tech and is recognized as one of the D-Sub type connectors. It is effectively used for many industrial, commercial and home applications. Being a D-shaped connector it features a female and a male contact on a single connector so that its installation and use is greatly simplified.D-shaped connectors are also known as D-Sub type connectors. This type of connector has contacts typically mounted on the top and bottom of the fixture and the corresponding male is inserted from the back so that contact is made outside of the connector. The main advantages of using this type of connector are its low profile and the ability to carry both power and signal in one connector.MDM-BT-37TE-SJS is typically used in harsh industrial environments where its rugged design makes it ideal. It has a wide range of applications such as in point-of-sale terminals, cash drawers, automobile navigation systems, vending machines, gaming equipment, and even electric tools.The MDM-BT-37TE-SJS comes with two fixed plugs. The first plug has a power contact that is rated up to 60 volts and 5 amps, while the second plug has data contacts rated up to 300 Mbps. Its maximum data transmission rate is 18 GB/s and it is also capable of reverse data transmission.In addition to functioning as a direct connection on many industrial devices, the MDM-BT-37TE-SJS can be used in longer cable runs by using an appropriate extender backshell that is compatible with the connector. These backshells come in either plastic or metal, and in different sizes and colors to match the unique needs of the device being used.The inner construction of the MDM-BT-37TE-SJS is based on a standard D-Sub design with its contacts pre-installed in molded plastic components. The contacts are surrounded by a metal shield and the assembly is locked with the hood and the backshell. The hood and the backshell provide shielding that reduces any interference from outside sources.The working principle of the MDM-BT-37TE-SJS is to provide a reliable connection between two devices. The connector is designed to provide a connection between the power and data contacts present on each side with minimal electrical resistance. This minimal electrical resistance enables quick and accurate data transmission between the two connected devices.The MDM-BT-37TE-SJS is a great choice for a wide variety of applications. Its low profile and the ability to carry both power and signal in one connector make it well-suited for industrial applications. It is also designed and tested to adhere to IP65 regulations against dust and water penetration, to make it suitable for harsh and extreme environments. Its rugged design and compatibility with backshells make it versatile and customizable. The MDM-BT-37TE-SJS is the ideal solution for various industrial, commercial and home applications.

The specific data is subject to PDF, and the above content is for reference