20-101-1093

Series:	RabbitCore®
Part Status:	Active
Module/Board Type:	MPU Core
Core Processor:	Rabbit 4000
Co-Processor:	--
Speed:	29.49MHz
Flash Size:	512KB
RAM Size:	256KB
Connector Type:	IDC Header 2x25, 2x5
Size / Dimension:	1.41" x 1.88" (36mm x 48mm)
Operating Temperature:	0°C ~ 70°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded - Microcontroller, Microprocessor, FPGA Modules

The 20-101-1093 application field and working principle represents one of the most commonly used computer systems used in embedded control applications. As such, it is used in microcontrollers, microprocessors, and FPGA modules. This article provides a brief overview of the 20-101-1093 application field and working principle.The 20-101-1093 is a type of microcontroller, which is a small, low-power, integrated circuit designed to run a limited set of software instructions. The microcontroller is programmed using a series of assembly language instructions. These instructions control the hardware connected to the microcontroller as well as the logic operations. A microcontroller typically contains an internal clock, memory, timers, and a reset circuit.The 20-101-1093 is a 32-bit controller that uses a 5-volt supply and performs 8-bit operations. The processor is composed of a number of registers which store the state of the executed instructions. It includes an 8-bit data bus for data transfers and an 8-bit address bus for memory operations. The instruction set includes a variety of data manipulation instructions and branch instructions.The 20-101-1093 microcontroller can be used to control a variety of embedded systems. For example, it can be used to control the user interfaces of embedded systems such as appliance controllers or automatic parking systems. The microcontroller can also be used to control mechanical systems such as motors, pumps, and valves. Additionally, it can be used as a remote control device or a system on a chip (SoC).The 20-101-1093 is popularly used in FPGA modules, which stands for Field Programmable Gate Arrays. A FPGA is a component that can be programmed to execute specialized tasks. It is composed of an array of logic gates that can be programmed to carry out specific tasks. FPGAs are used in a variety of embedded systems, especially where fast switching and communication is required.The 20-101-1093 is ideal for use in FPGAs as it is very fast in comparison to conventional microcontrollers. Additionally, it can be configured to perform complex operations in a short time, which makes it attractive for application in a variety of embedded systems. The 20-101-1093 can be configured to execute multiple instructions in parallel. This enables it to process large amounts of data at high speeds.In summary, the 20-101-1093 application field and working principle represent one of the most commonly used embedded systems today. It is a type of microcontroller which uses a 5-volt supply. It is used mainly in microcontrollers, microprocessors, and FPGA modules. The 20-101-1093 is widely used in embedded systems due to its fast operation, low power consumption, and low cost. It is ideal for application in a variety of embedded systems, especially where high performance is needed.

The specific data is subject to PDF, and the above content is for reference