0022122106

Rectangular connectors - Headers, Male Pins consist of a versatile electrical connector with a range of applications in areas such as medical, test and measurement instruments, automotive industry, etc. The connectors provide a robust connection between two or more circuits, allowing for the transition of digital or analog signals. They are usually two- or three-way, although some configurations are available with up to twenty-four-way connectors.

The 0022112106 is a two-way connector that is designed for use in a range of applications. It is composed of two male pin headers, one on each end, which are connected with a single wire that runs through the connector. The pins are typically positioned in an angled orientation, allowing for space savings when the connector is mounted in a board or enclosure.

The 0022122106 is a three-way header with two male pin headers, one pin located in the center, and one at each edge. It is a variation of the two-way connector that can be used in applications that require a higher bandwidth and relatively large connectors to accommodate more wires. The two outer pins are typically connected to the same wires, while the center pin is used to carry a signal, allowing for a more efficient connection.

In both configurations, the connections between the wires and the pins are soldered onto a board or other substrate, allowing for a mechanically robust connection. The male pin headers are designed with a mechanical interlock feature that prevents them from being disconnected while in use. Additionally, the pins feature insulated rubber boot to protect against accidental contact with other metal surfaces and provide additional strain relief.

The working principle of a connector is relatively straightforward and similar regardless of the type. When a current is applied to the connector’s pins, the current travels through the wire and reaches the other end, where it is then applied to a device or circuit. The current then continues to travel through the device, circuit or other component back to the original connector, ensuring that a proper electrical connection is made. This process ensures that any data, power or other signals are transmitted and received correctly.

The 0022122106 is a reliable and versatile rectangular connector for connecting signals, power and data lines. It is composed of two or three male pin headers that are connected with wire and soldered onto a board or other substrate. It is also relatively easy to install and the pins feature a mechanical interlock and insulated rubber boot for protection. With its low profile design and mechanical interlock, this connector is suitable for a wide range of applications in medical, test and measurement instruments, automotive industry, etc.