0070.1141.T2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppression (TVS) devices, such as Varistors, MOVs, are widely used in a variety of applications and are particularly well-suited for protecting sensitive or vulnerable electronic components and circuitry from the transient voltages or spikes induced by nearby sources. In most cases, these transient voltages or spikes pose a threat beyond the limited voltage rating or tolerance of the underlying equipment.

One of the most commonly used TVS devices is the 0070.1141.T2 Varistor, which is used in a variety of applications to minimize the impacts of transient voltage and provide robust protection. These Varistors feature good surge performance, ESD protection, and high stability during temperature cycling. The device also offers low cost, easy to use features, and great durability, making it a popular choice.

The 0070.1141.T2 Varistor is designed for over-voltage protection of electronic systems and for other transient protection applications. The device is a silicon-based Varistor, which means that it operates by changing its inherent impedance when a voltage spike is sensed upon its input. Once the current reaches a certain level, the Varistor\'s built-in impedance increases, thus limiting the voltage that can flow through its terminals. This limit protects the underlying equipment or devices from potentially damaging over-voltage.

The 0070.1141.T2 Varistor is also designed for ESD (electrostatic discharge) protection. This device contains two parts, a clamping diode and a Varistor element that is comprised of multiple MOV (Metal-Oxide Varistor) elements that are connected in a series-parallel configuration. Once energized, the device acts like a clamp, diverting any current away from the protected component or circuit and into the Varistor element. This capability is beneficial in a variety of applications where protecting against arcing and short circuits are key concerns.

In addition to providing transient voltage protection, the 0070.1141.T2 Varistor is often used to reduce RF (radio frequency) interference and to suppress spikes that may cause interference to electronic or communication systems. The device has a typical clamping voltage of 14V and provides a high impedance for RF frequencies below 100 MHz. This is beneficial for devices that require a significant amount of RF noise protection.

The 0070.1141.T2 Varistor is available in a variety of packages and is suitable for a variety of power supply designs. The device is capable of operating between -40°C and +125°C and has surge current ratings up to 10,500A. It is also designed to meet most safety standards, including UL 94V-0, VDE 0884, and IEC 60127-2. This makes the 0070.1141.T2 Varistor an ideal choice for a variety of applications, including consumer electronics, automotive, medical, and telecommunications/networking.

The 0070.1141.T2 Varistor is an ideal choice for designers who are seeking a low-cost, easy to use, reliable, and robust overvoltage protection solution. The device offers excellent surge performance, ESD protection, and high stability during temperature cycling, making it suitable for a variety of applications. The device also provides a high level of RF interference protection, making it an excellent choice for applications where RF noise must be minimized.

The specific data is subject to PDF, and the above content is for reference