01008-2040

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders, such as the 01008-2040, are devices used to convert mechanical or digital information into a coded form. They are used to detect position, speed, and direction of a shaft, and to generate electrical signals in response to motion. Encoders can also be used to measure linear displacement, linear velocity, and rotational velocity.

The 01008-2040 encoder is a digital pulse rotary encoder that can measure the position and direction of a rotating shaft and convert it to digital or electrical signals. It has a hollow-shaft design, which allows it to be mounted directly onto the motor shaft for easy installation. The shaft can be rotated in a range of 360° with a resolution of 4 pulses per revolution. The output signal is a two-channel quadrature signal, which has a rising edge for one output channel and a falling edge for the other.

The 01008-2040 has a working voltage of 5 to 24 VDC with a current draw of 8 mA. It has an internal quadrature encoder with an incremental resolution of 4 pulses per 360° and quadrature signals. The output signal is a two-channel quadrature signal with 25 kHz pulse rates. Its operating temperature range is -25° C to +85° C and its storage temperature range is -40° C to +85° C. It has a protection rating of IP50.

The 01008-2040 encoder can be used in a variety of applications such as motor control, robotics, and automation. In motor control applications, the encoder can be used to detect and control the speed of the motor. The encoder can also be used in robotics applications to measure the position and speed of the robot arm. In automation applications, the encoder can be used to help with the positioning of an object by providing feedback to the system so that the object can be moved to its desired position.

The working principle of the 01008-2040 encoder is based on the principle of optical encoding. This type of encoder uses light and a photodetector to detect the position of the shaft. The photodetector is connected to the encoder and detects the light emitted from a series of slits in a disk mounted onto the shaft. As the shaft rotates, the disk also rotates, causing the slits to pass over the photodetector. The photodetector then sends a signal to the encoder, which processes the signal and outputs the correct position information.

The 01008-2040 encoder is a reliable and efficient way to measure the position and direction of a rotating shaft and convert the information into digital or electrical signals. Its hollow shaft design makes it easy to install, and its internal encoder provides accurate position information. Its wide temperature range and IP50 protection rating makes it perfect for use in a variety of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference