0150200341

Series:	Premo-Flex™ 15020
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	32
Pitch:	0.020" (0.50mm)
Length:	3.000" (76.20mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables

Flat flex and ribbon jumper cables (0150200341) are becoming increasingly popular in a wide range of applications. They provide a simple way to join two pieces of circuitry together in order to allow a signal or power to flow between them. The flat flex and ribbon jumper cables provide an easy solution for joining circuits without solder.

Flat Flex Cables

Flat flex cables are thin flexible wires that are typically used in high density applications such as industrial controllers, computers, or robots. They are made up of insulated strands of copper or steel wire that are bonded together with adhesive to create the flexible cable. The flat flex cables are designed to be used in tight working spaces and contours. They are also used in applications where a flexible cable is needed to accommodate movement.

Ribbon Jumper Cables

Ribbon jumper cables are flat tapes made of copper or aluminum that have been bonded together and cut into various widths. These are typically used to connect circuit boards together, or to connect two components on a board. The flat tapes have insulating material applied at the ends in order to prevent short-circuiting. Ribbon jumper cables come in a variety of sizes and colors depending on the application requirements.

Applications

Flat flex and ribbon jumper cables are used in a wide range of applications, from automotive electronics to consumer electronics. They are popular in computers, networking and communications devices, home and automotive electronics, GPS systems, robots, industrial machines, medical devices, and more.

Working Principle

The working principle of flat flex and ribbon jumper cables is fairly straightforward. The electrical currents in the flat flex or ribbon cables are conducted through the insulated strands of copper or steel. The insulating material acts as a barrier between the strands and prevents short-circuiting. Because of the flexibility of the cables, they are able to bend and fit into tight spaces.The currents in the flat flex and ribbon cables are affected by the resistance of the strands of copper or steel. Resistance, measured in ohms, is created when a voltage is applied to the cables. The cables must be able to handle the current flow without overheating. A higher resistance can cause the cables to heat up, which can cause damage to the cable or the attached components.

Conclusion

Flat flex and ribbon jumper cables (0150200341) are popular in a wide range of applications. They provide an easy solution for joining circuitry without solder and they come in a variety of sizes and colors. The working principle of flat flex and ribbon jumper cables relies on the insulated copper or steel strands that conduct current and the insulating material that prevents short circuiting.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description