0150200991

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex and Ribbon Jumper Cables are two types of armored cable and have become increasingly popular for use as jumper and patch cables in various industries. In this article, we\'ll discuss the 0150200991 application field and working principle of these cables.

Flat Flex

Flat Flex cables are designed with thin flat and flexible metal strands and are typically used in applications where tight corners or bends are necessary. The thin flat strands are used to ensure the cables fit into tight spaces or bends without encountering any mechanical stresses. The flexible metal strands also make it possible to construct cables that can traverse narrow spaces without the need for additional support.

These cables are made with flat conductive strands between two layers of insulation, typically PVC or polyurethane, and can be flat or round. Different types of insulation are used depending on the application and the temperature range. Flat Flex cables are usually used in applications with higher current and voltage requirements, where round cable cannot provide the necessary protection.

In addition to their flexibility, Flat Flex cables are also available in a variety of sizes and can be supplied in a variety of configurations, including single- or multi-pin, shielded and unshielded, and straight or angled. These cables are often used for high-speed data transfer and in areas where space is limited.

Ribbon jumper cables

Ribbon Jumper cables are a type of armored cable designed to be very flexible, yet strong. Unlike Flat Flex cables, Ribbon Jumper cables are constructed from a ribbon of metal strands woven together. This construction provides a much greater degree of flexibility and reduces the risk of the cable being damaged by mechanical stress.

The Ribbon Jumper cables are also insulated with PVC or polyurethane to protect against electric shock. They are available in a variety of sizes and configurations, including single- or multi-pin, shielded and unshielded, and straight or angled. Ribbon Jumper cables are commonly used for data transfer applications, especially when routing cables around tight corners or bends.

The 0150200991 application field of Ribbon Jumper cables includes both high-current and high-voltage applications, as well as applications where the cables can be routed through very tight spaces and bent around corners without the risk of damage. Ribbon Jumper cables are also available in low-voltage versions for use in lower-power applications.

Working Principle

Flat Flex and Ribbon Jumper cables both transfer electrical current from one point to another in the form of electrons, which are negatively charged particles. But there are some differences between these two types of cables, which affect their specific application. Flat Flex cables create an electrical connection through their flat metal strands, while Ribbon Jumper cables create an electrical connection with their woven metal ribbon.

When current flows through the metal strands or ribbon, the electrons become mobile and move from one strand or ribbon to another, completing the circuit and transferring the electrical current. The electrons then travel along the length of the cable until they reach their destination. In this way, Flat Flex and Ribbon Jumper cables both transfer electrical current, albeit in different ways.

It is important to note that Flat Flex and Ribbon Jumper cables both need to have their insulation and shielding in order to work properly. If either type of cable is not properly insulated or shielded, it can cause an electrical short circuit, which can result in damage or failure.

Conclusion

Flat Flex and Ribbon Jumper cables are two types of armored cable that are becoming increasingly popular for use as jumper and patch cables in various industries. These cables are specifically designed to be bent or routed through tight spaces, making them ideal for applications where space is limited. Both types of cables work by transferring electrical current in the form of electrons, though they do so in slightly different ways.

It is important to ensure that Flat Flex and Ribbon Jumper cables are properly insulated and shielded to prevent electrical shorts or failure. In general, these cables are ideal for applications in which tight spaces or corners are necessary or in applications where high-voltage or high-current applications are required.

The specific data is subject to PDF, and the above content is for reference