0150201191

Series:	Premo-Flex™ 15020
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	47
Pitch:	0.020" (0.50mm)
Length:	4.000" (101.60mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables

Flat flex and ribbon jumper cables are the applications of 0150201191 technology. They are based on a common principle of network cabling and can be used to bridge the gap between two networks, or to create a direct connection between two systems.The flat flex and ribbon jumper cables are generally made up of pliable wires, commonly known as "ribbon" cables, which can be bent or twisted into place. The flat flex can be bent into place and the ribbon can be soldered or crimped. Ribbon cables can also be used to enable data transfer between two systems even if those systems are not physically connected, such as allowing an external device or a computer to access a network.The primary use of flat flex and ribbon jumper cables is in connecting computer hardware components such as hard drives, motherboards, memory and other devices that need a secure connection. However, these cables are also used in a variety of other applications such as networking and data transfer between devices.Using ribbon cables is generally considered a more secure connection than using a flat flex cable. This is because ribbon cables are more durable and can be twisted more easily, whereas flat flex cables can be easily damaged. Ribbon cables are also more resistant to electromagnetic interference, meaning that data can be transferred more reliably.Flat flex and ribbon jumper cables are typically made up of two or more wires, usually with a variety of colors, and are terminated with a connector at each end. The connectors are what enable connection between two devices or systems. The most common connectors used are USB, SCSI, Network Multilink, and Ethernet. The use of a connector also ensures compatibility between two systems as they can only be connected if they have the same type of connector.The working principle of flat flex and ribbon cables is based on the transmission of high frequency signals. The signals are sent through the cable as alternating current, and as the current passes through the cable, it induces a voltage in the conductor at the other end, which is used to power devices connected to it. The signal then travels along the cable until it reaches the other end, which allows data transfer between sources and destinations.The cables come in a variety of lengths and can usually be found in different widths as well, depending on the type of application. The flat flex cables have an increased flexibility and the ribbon cables are more durable, making them suitable for a variety of applications. Both can be used to bridge the gap between two networks or systems, and can also be used to enable data transfer from one system to another.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description