0151660384

Series:	Premo-Flex™ 15166
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	36
Pitch:	0.020" (0.50mm)
Length:	2.000" (50.80mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on One Side, Bottom on Other, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper CablesFlat flexible electric cables are one type of thin, flexible cables used for breadboarding, prototyping, and connecting electronic components. They are often used to assemble circuit boards, and are found in many electronic applications. Flat flex cables, also known as flex ribbons, offer easy handling, flexibility, and high versatility, enabling a variety of different types of connections between electronic components.Flat flex cables have thin, flat conductors which are insulated from each other within a flat sheath. The most common type of flat flex cable features two thin solid-bodied conductors. Each conductor consists of a thin rigid metal core surrounded by an insulator, and then enclosed in a flexible jacket. These thin and flexible cables provide high levels of electrical continuity and also have good resistance to temperature, moisture, and vibration. These cables are often used when making prototype boards, as they are much easier to handle and use than ordinary cables. This is because the flat shape of the cable helps reduce the amount of wiring needed and can help keep the board neat and tidy. The main purpose of flat flex cables is to enable connection between two different points in a circuit. This type of connection is often referred to as an inter-board connection, and is used to connect test equipment to the circuit board or to connect multiple sections of a circuit. It is important to note that when connecting two boards with flat flex cables, the mating point should be carefully examined to ensure that it is properly insulated.The two types of flat flex cables available are ribbon cables and flat flex cables. Ribbon cables are flexible and easy to work with, however they are limited to short lengths and will fatigue easily. Flat flex cables, on the other hand, are used for longer lengths and offer good mechanical resistance and high flexibility.In addition to its electrical properties, flat flex cables are also designed with mechanical properties in mind. Many flat flex cables feature an end style that protects the internal conductors from any type of damage. This type of end style is popular in applications where vibration or shock is present, such as mobile phones and other handheld electronic devices.The working principle of flat flex cables is relatively simple. In essence, the electrical current is conducted through the flat conductor from one end to the other, and the amount of current passing through the cable is determined by the resistance of the internal conductors. As with all electrical circuits, the voltage and current flow through the circuit is dependent on the total resistance of the different parts of the circuit. Therefore, when connecting two boards with flat flex cables, careful consideration must be taken to ensure that the resistance of the conductor is not too high, or too low. Finally, flat flex cables must be inspected to ensure that they are in good condition. In particular, manufacturers should check the insulation and make sure that none of the internal conductors have been damaged or exposed. It is important to note that flat flex cables can easily be damaged if not handled and stored correctly, so care must be taken to ensure that they remain in good working condition.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description