0151680219

Series:	Premo-Flex™ 15168
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	16
Pitch:	0.049" (1.25mm)
Length:	5.000" (127.00mm)
Length - Exposed Ends:	0.197" (5.00mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex and Ribbon Jumper Cables are connectors that facilitate the connection of devices with different points in an electrical circuit. They are used to bridge the gap between different components and to transfer signals. The main application fields and working principle of Flat Flex and Ribbon Jumper Cables are discussed below.

Application Field

Flat Flex and Ribbon Jumper Cables are mainly applied in these fields now:

• Automotive: Automotive electronics, such as sensors, need to be connected with the other components. Flat flex and ribbon jumper cables are used extensively in the automotive industry.
• Aerospace: For the same purpose, Flat flex and ribbon jumper cables are used for connection in the aerospace industry. In the aerospace industry, they are used for interfacing control systems, power systems, and communication systems.
• Communication: The use of Flat flex and ribbon jumper cables in communication varies from intra-device connection to cross-channel connection. They are also used for connection between data networks and devices, such as routers and switches.
• Industrial: Flat flex and ribbon jumper cables are extensively used for automation in industrial fields. They are used to connect sensors, control systems, and power systems in industrial sites.

Working Principle

The working principle of Flat Flex and Ribbon Jumper Cables is quite simple. A flat flex or ribbon jumper cable consists of a set of flexible strands of metal that are connected to each other. They are connected to each other in a way that makes them act like a single unit, with all the strands connected in parallel. Each strand is insulated so that an electrical current can flow along it without interference. To achieve this, each strand is insulated with a thin layer of plastic. The insulation increases the surface area of each strand, allowing more current to flow than if it were not insulated.When the strands are connected, the current will be spread out evenly across all of the strands, instead of going in a single direction. This enables a signal to be carried from one device to another without interference.

Conclusion

Flat Flex and Ribbon Jumper Cables are essential components of any electrical circuit. They enable signals to be carried between different points in a circuit without interference. They are widely used in the automotive, aerospace, communication, and industrial fields. The working principle of Flat Flex and Ribbon Jumper Cables is based on the insulated and parallel-connected strands of metal, which act as one unit and spread the current evenly throughout the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description