0151680944

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flexible Cables (FFCs), Ribbon Jumper Cables (RJCs) and 0.15mm Pitch Conventional Cables are geared towards applications requiring high signal densities and low noise. With their slender designs, these cables can also fit into tighter spaces than other types of cables. The intricacies of these cables, as well as their uses, will be discussed below.

Flat Flexible Cables (FFCs)

Flat Flexible Cables are one of the most versatile types of cable, due to the fact that they can be used for a variety of applications. FFCs are typically used for industrial and consumer electronics due to their ability to bend in multiple directions while using a minimal amount of space.

These cables can be either single-ended or double-ended. Single-ended cables are straight, while double-ended cables have a pin at each end and use a header to connect them into a board. FFCs typically have a range of 0-100 pins between them, although they can be up to 200 depending on the application. With such a range of pins, FFCs can easily be used for applications such as video cameras, audio systems, robots, and more.

In order to make sure that the cables work effectively, they must be properly shaped and bent prior to installation. This can be done by using a jig or other tool to ensure that the pins make contact with the board. Additionally, FFCs should be tested to ensure that there is no damage or breakage of the pins during the assembly process.

Ribbon Jumper Cables (RJCs)

Ribbon Jumper Cables are used mainly for high-speed data transmission. These cables are designed for low voltage applications such as computer and communication networks. They are composed of individual wires that are joined together with a flexible cover. The wires are typically made up of conductive material such as copper or aluminum.

Unlike FFCs, RJCs are not as flexible as they are designed to be more rigid in order to maintain signal integrity over long lengths. Additionally, they are also not as thin as FFCs due to the fact that they need to provide a secure connection between the wires. RJCs usually include 50-200 pins and are available in a variety of sizes, from 0.3mm-3mm.

Ribbon Jumper Cables are an ideal choice for applications requiring high data transfer rates such as HDMI, Bluetooth, USB, and Ethernet. Additionally, they have been proven to be more reliable than other types of cables due to their ability to remain stable during operation.

0.15mm Pitch Conventional Cables

0.15mm Pitch Conventional Cables are a type of flat cable design that is commonly used for circuit board interconnectivity. They are typically made up of two to six insulated copper conductors and are characterized by their very small pitch dimension. This type of cable is often used in applications that require quick data transmission such as video and audio systems.

0.15mm Pitch Conventional Cables can be connected to a board by using a header or a connector. They are typically soldered onto a board, however a soldering iron may not be necessary as some types of cables can be pressed into the header or connector. This type of cable is also more reliable than FFCs and RJCs due to its increased resistance to EMI and RF interference.

Overall, Flat Flexible Cables (FFCs), Ribbon Jumper Cables (RJCs) and 0.15mm Pitch Conventional Cables are all ideal choices for applications requiring high signal densities and low noise. With their slender designs, these cables can fit into tighter spaces than other types of cables. As such, each type of cable must be chosen based on the requirements of the specific application.

The specific data is subject to PDF, and the above content is for reference