0152670934

Series:	Premo-Flex™ 15267
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	23
Pitch:	0.039" (1.00mm)
Length:	8.000" (203.20mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on One Side, Bottom on Other, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex

Flat Flex cables, also known as FFC (Flexible Flat Cable) or FPC (Flexible Printed Circuit), are a type of cable used mainly for compact, lightweight and reliable data inter-connecting device. These cables are generally cheaper and more reliable than ribbon jumpers, but do not provide as much flexibility. They are typically used in applications where space is limited and where the use of standard connectors and flat designs are necessary.FFCs consists of strands of insulated wires which can be laid side by side, with their ends being connected in a patterned arrangement. The insulation, normally PVC, is usually attached by means of a heat-sealant which fuses the insulation to the strands of wire. The wire strands are then soldered on to the contacts on one side of the board.The most common types of flat flex cables have two, three or four wires. Each wire usually has a separate connection on one side, with the other side of the wire being free. This allows for both ends of the cable to be connected to the same point, or to two different points, which makes it possible for the cable to be used as a jumper.Flat flex cables offer advantages such as being smaller and lighter than ribbon jumpers, and easier to install. They require less space and have a lower power consumption, as well as being much cheaper than ribbon jumpers.

Ribbon Jumper Cables

Ribbon jumper cables are a type of cable used for routing signals and power between printed circuit boards (PCBs). These cables provide the connection points for signals and power to other components on the PCB. The connection is usually made through the use of a connector or header.The most common type of ribbon jumper cable has a length of one or more strands of insulated wires. These wires are spaced apart by a thin gap and then connected in a straight line. The wires are surrounded by an insulation material such as PVC or PTFE, which provides protection from environmental elements and other signals.Ribbon jumper cables are generally more expensive than flat flex cables, but are also more flexible. This makes them ideal for applications where multiple connections are needed and routing signals through complex pathways. They offer a greater range of applications, as they can be used for routing both power and signals. They are also usually more reliable than flat flex cables and offer better insulation properties.In conclusion, the choice between flat flex or ribbon jumper cables will depend on the specific application. Flat flex cables offer advantages such as low cost and size, while ribbon jumper cables are more flexible and offer better insulation. It is important to consider the requirements of the application, as well as the pros and cons of each type of cable, to make the best choice.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description