0217010.VXP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

0217010.VXP Application Field and Working Principle

Fuses, such as 0217010.VXP, are used to protect equipment from overload or short circuits. A fuse is a device with two elements: a current-sensitive element and a control element. The current-sensitive element can be made of metal, ceramic, plastic, or a combination of these materials. This element responds to a current passing through it, ing or melting and causing an interruption in the circuit. The control element is typically a spring-loaded push button or a switch, which works to either open or close the circuit when the current exceeds a certain level or when the current is interrupted.

The 0217010.VXP is an fuse used for overvoltage protection in an alternating current (AC) circuit. This particular fuse features a voltage rating of 250 VAC and a rating of 10 Amps, allowing for up to 10 amps of current when connected in series to the correct voltage source. The fuse features a current-sensitive element made of ceramic and designed to respond to an over-current situation and interrupt the circuit. The control element is a spring-loaded push button, which works to close the circuit when the current exceeds a certain level. The push button also includes a visual indication to show the current status.

The 0217010.VXP is rated for a maximum temperature of 85°C and features a minimum current rating of 1 milliamp. This fuse is also capable of operating at a voltage of up to 275VAC. The 0217010.VXP fuse is designed for use in consumer and commercial applications and is approved by UL and/or CSA for use in Class A, B, and C circuits. Additionally, this particular fuse features a time-delay characteristic, allowing it to withstand momentary impulse or high energy impulses.

The 0217010.VXP is capable of limiting the current in a circuit while preventing nuisance trips. This is accomplished by buffering the current overshoot, allowing the current to slowly drain off without pulling the circuit breaker. The delayed action of the fuse also helps to reduce maintenance costs since the replacement elements are much cheaper than the equipment they are protecting.

The 0217010.VXP is also equipped with a positive temperature coefficient (PTC) resistor. This PTC resistor thermally limits the current to a safe level when the temperature of the circuit exceeds the fuse’s design limits. This temperature limit is determined by the resistance of the PTC resistor and is typically set to trip on temperatures in the range of 125°C to 150°C. This feature of the 0217010.VXP makes it highly reliable as it acts as an additional safeguard in the event of a system overload.

In conclusion, the 0217010.VXP is an AC fuse designed for overvoltage protection and is approved by UL and/or CSA for use in Class A, B, and C circuits. It features a current-sensitive element made of ceramic and a control element in the form of a spring-loaded push button. The fuse has a time-delay characteristic and also features a PTC resistor for additional overcurrent protection. In addition, the fuse’s ratings of 250VAC and 10A enable it to provide reliable overvoltage protection.

The specific data is subject to PDF, and the above content is for reference