0232004.MX125P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses

A fuse is an electrical safety device used to protect electrical circuits from damage caused by overload or short circuit. Fuses are rated in amps and volts according to their intended circuit protection application. The 0232004.MX125P is a medium voltage fuse designed for 8.3kV AC, and rated at 125A max.

Application Field

The 0232004.MX125P is designed for medium voltage (MV) applications, but is also used in some low voltage (LV) applications. Common uses for the 0232004.MX125P include renewable energy systems such as wind, solar, and battery storage systems, utility networks, industrial applications, and more. It is designed for outdoor applications, but also widely used in indoor applications such as also used in solar energy, electric power equipment, LED lighting and other places where short circuit protection is needed.

Working Principle

When the current flowing through the 0232004.MX125P exceeds its rated value, the fuse element will heat up and melt, opening the circuit and disconnecting the current supply, thereby preventing further damage to the circuit. The fusing speed is very important for the proper operation of the fuse, as the fuse should be able to open fast enough to prevent further damage to the circuit, but also slow enough not to open too easily upon normal operation.

The 0232004.MX125P fuse element is made of a metal alloy with a melting point of approximately 95°C in the case of a sudden overload or short circuit. When the fuse element melts, it disconnects the affected circuit, thereby limiting the current surge and preventing further damage. Once the overload or short circuit is removed, the circuit is disconnected until the fuse element is replaced.

Conclusion

The 0232004.MX125P is an electric fuse designed for medium voltage applications with a rated current of 125A. The fuse element is made of a metal alloy with a melting point of approximately 95°C, and can effectively protect electrical circuits from excess current. The 0232004.MX125P is used in a wide variety of applications and can provide effective short circuit protection.

The specific data is subject to PDF, and the above content is for reference