031-70237

Series:	--
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Connector Style:	BNC
Connector Type:	Plug, Male Pin
Contact Termination:	Crimp
Shield Termination:	Crimp
Impedance:	75 Ohm
Mounting Type:	Free Hanging (In-Line)
Mounting Feature:	--
Cable Group:	AT&T 735, 735A, Belden 735A1
Fastening Type:	Bayonet Lock
Frequency - Max:	3GHz
Number of Ports:	1
Features:	--
Housing Color:	Silver
Ingress Protection:	--
Includes:	3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Body Material:	Brass
Body Finish:	Nickel
Center Contact Plating:	Gold
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Operating Temperature:	-40°C ~ 85°C
Center Contact Material:	Brass
Voltage Rating:	500V
Mating Cycles:	500
Insertion Loss:	0.2dB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

031-70237 Coaxial Connectors (RF)

Coaxial connectors (RF) are one of the most common types of electrical connectors found in the electronics industry. Commonly referred to as coaxial cables, these connectors are small, lightweight and designed to be used as a means of transferring energy between two electronic components.

Application Field

Coaxial connectors (RF) are widely used in a variety of applications. They are most commonly used in applications that require high frequency signals, such as broadcast television and radio transmissions, cellular telephone communications, and wireless computer networks. Additionally, these connectors are frequently used for low-power digital audio and video signals.They are also used in applications where electrical impedance must be matched. For instance, the connectors may be used to connect a television antenna to a television receiver or to link a speaker to an amplifier.

Working Principle

The working principle of a coaxial connector is relatively straightforward. The two ends of the connector are made up of two parts: the inner conductor and the outer conductor. The inner conductor, which usually consists of a thin metal tube, allows an electrical signal to be transferred between two components. The outer conductor, usually a metal sleeve or a mesh-like shield, provides a path for the electromagnetic field to form around the connector.To ensure a good connection, the inner and outer conductors must be held firmly in place. This is usually accomplished by either soldering or compression fittings. A connection is made once the connectors have been secured.The electrical signal is then passed through the connector and travels between the two components. The signal will remain clear and uninhibited as long as the connection is secure and the conductor path is kept free of any interference.

Conclusion

Coaxial connectors (RF) are an essential part of the electronics industry. Thanks to their versatility, they can be used in a variety of applications, from broadcasting to wireless networking. The working principle of a coaxial connector is relatively straightforward. The two ends of the connector are made up of two parts: the inner conductor and the outer conductor. To ensure a good connection, the inner and outer conductors must be held firmly in place. In doing so, a solid connection is created, allowing electrical signals to travel between two components without any interference.

The specific data is subject to PDF, and the above content is for reference