0322010.H

0322010.H Application Field and Working Principle

Fuses are designed to safely protect circuits and wires from excessive amperage caused by an overloaded circuit. The 0322010.H Fuse is a type of fast-action J-type fuse specifically designed for high speed circuit protection from over-current. It is an ideal choice for power distribution, motor control, and other sensitive electronic circuits.

Working Principle

The 0322010.H Fuse is made up of tightly coiled wire element that is connected to two tinned-copper end caps. The wire element is enclosed in a small white plastic case that also includes an internal insulating material. When the current in the device increases, the element heats up. When the temperature in the wire gets too high, it causes the wire to expand, which in turn breaks the circuit. Once the current is cleared, the wire will begin to cool off and can reset itself.

Application Field

The 0322010.H Fuse is commonly used in household applications, such as kitchen appliances and televisions, as well as industrial applications, such as motor controllers and power supplies. It is also used in high speed circuits that require very fast response times. This makes the 0322010.H Fuse ideal for those applications where failure may cause damage to expensive components.

Specifications

• Rated Voltage: 125VAC
• Rated Interrupting Capacity: 15A@250VAC
• Cold Resistance Range: 0.008-0.017 ohms
• Reset Time: 40ms max
• Operating Temperature: -20°C to 70°C

Advantages

The 0322010.H Fuse is a cost-effective solution for providing circuit protection for sensitive electronics. It has a small size, making it easy to install, and also able to operate in temperatures as low as -20°C. The small size also makes it suitable for applications that require a very fast response time. The 0322010.H Fuse is UL & CSA certified, making it a reliable choice for protecting sensitive electronic circuits.

Disadvantages

One of the main disadvantages of the 0322010.H Fuse is that it can be difficult to reset after a power surge. It also has a limited current capacity, so it may not be suitable for applications requiring more protection. Finally, the 0322010.H Fuse is not suitable for use with AC or DC current, so for those applications, another type of fuse should be used.