0395435120

Mounting Type:	Through Hole
Screw Thread:	--
Torque - Screw:	0.4 Nm (3.5 Lb-In)
Screw Material - Plating:	Steel
Clamp Material - Plating:	Brass
Contact Material - Plating:	Brass - Tin Plated
Housing Material:	Polyamide (PA66), Nylon 6/6
Operating Temperature:	-40°C ~ 105°C
Color:	Black
Features:	Interlocking (Side), Positions Stamped
Wire Termination:	Screw - Rising Cage Clamp
Series:	Eurostyle™ ESE 39543
Wire Gauge:	16-24 AWG
Voltage:	300V
Current:	10A
Mating Orientation:	Vertical with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	20
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks – Wire to Board are a type of electrical connection mainly used in industrial applications. They are specifically designed for easier connection between two electrical conductors and provide a quick, robust and reliable form of interconnection.Terminal blocks are made up of several individual components. The most common components of terminal blocks are the barrels, connectors, and insulators, each designed to facilitate efficient electrical connection. Depending on the application, additional components may be required such as marking posts, identification strips, terminals, screws, tags and covers.Barrels are the key structural components of terminal blocks. They are the mounting part to which all other components (i.e. insulators, connectors, etc.) are attached. The barrel has two main features, the cross section and the build height. The cross section is the cross sectional area of the terminal block and is the area for the conductor to pass through. Build height refers to the amount of height available to allow for the insulation between conductors or for increased conductor clearance.Connectors are the electrical components of terminal blocks and are used to make the electrical connection. Connectors typically come in two types – male or female – and can either be spring loaded or screw to hold the connection together. Terminal blocks with high current ratings typically have oversized connectors and are designed to provide a secure connection as well as a robust electrical contact. Insulators are also a key component of terminal blocks and are necessary for electrical safety. Insulators are used to separate two wires and to provide a degree of electrical insulation. Insulators are typically made of plastic or other insulating materials.In terms of application field, terminal blocks – wire to board can be used in a wide range of industrial applications such as motor control, power conversion, relay control, and instrumentation. They are also used in industrial automation systems such as PLCs, distributed control systems, and machine control systems. In terms of the working principle, terminal blocks – wire to board are designed to provide an electrical connection between two conductors. The connectors are typically spring loaded or screw to help secure the connection. Since the connectors have a higher current rating than typical connections, the terminal blocks provide a more robust and reliable connection when there is a need for higher current ratings. Insulators are also used to separate two wires and to provide a degree of electrical insulation.Terminal blocks – wire to board provide a quick, robust and reliable form of electrical interconnection and are suitable for a wide range of industrial applications. They are a cost effective solution for both simple and complex electrical connections. With the help of the various components (e.g. barrels, connectors, insulators), terminal blocks are able to provide a secure, reliable and electrical contact.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description