0395932607

Mounting Type:	Through Hole
Screw Thread:	--
Torque - Screw:	0.34 Nm (3.0 Lb-In)
Screw Material - Plating:	Steel
Clamp Material - Plating:	Brass
Contact Material - Plating:	Brass - Tin Plated
Housing Material:	Polyamide (PA66), Nylon 6/6
Operating Temperature:	-40°C ~ 105°C
Color:	Green
Features:	Positions Stamped
Wire Termination:	Screw - Rising Cage Clamp
Series:	Eurostyle™ ESE 39593
Wire Gauge:	14-22 AWG
Voltage:	300V
Current:	10A
Mating Orientation:	Horizontal with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	7
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Wire to BoardTerminal blocks – wire to board consists of three terminal types: barrier strip, screw, and spring clamp. These terminals are typically used in low- and medium-current applications, where the user needs to seamlessly anchor wires, strip insulation, make contacts, and transfer power.Terminal blocks – wire to board come with a range of features, materials, and plating. They offer increased safety and nameplate engraving that is helpful in identifying the terminal block number. They may also come with optional fuses, overload protection, surge protection, signal conditioning, or LED status indicators.Since applications can vary based on current, voltage, and wattage requirements, it is important to determine what type of terminal block is right for your project. Below are some of the main differences between each terminal type functionally and mechanically.Barrier Strip Terminal Blocks: This type of terminal block is commonly used for power distribution applications. It features a unique U-shaped conductive spring clip design that provides both electrical and mechanical continuity when a wire is inserted into the block. It contains heavily plated pressure contact spring terminals for easier connection and increased reliability.Screw Terminals: This type of terminal block is ideal for medium-current applications. It has knurled screws that clamp the connection and provide an electrical and mechanical connection between the wire and terminal block. The heavily plated mated spring terminals provide superior contact and corrosion resistance.Spring Clamp Terminals: This type of terminal block is most commonly used in low-current applications in which only one wire is connected to the terminal block. It features a spring clamp pin that is designed to open, allowing a wire to easily be inserted. When the clamp pin is released, the contact spring secures the wire and provides an electrical and mechanical connection.For all types of terminal blocks – wire to board, it is important to select the size and rating that best meets the requirements of the application. As a general rule, the terminal block should be rated for twice the maximum current that will flow through it. By following this guideline, users can ensure that the performance, reliability, and safety of their system is maximized.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description