0444-2-17-15-30-14-02-0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 0444-2-17-15-30-14-02-0 application field and working principle can be broadly categorized into the terminals – PC pin receptacles, socket connectors. These terminals are designed to be used in a variety of applications, including appliances, consumer electronics, industrial equipment, and computers. Essentially, these terminals are designed to ensure electrical connectivity between two or more pieces of equipment or components. This can be done through metal contact pins that are arranged in various ways, depending on the application and design.

Socket connectors, sometimes referred to as terminal blocks, are used to connect two sets of wires. They fulfill both the electrical and mechanical connection requirements for a power supply connection or signal connection. Socket connector circuits often involve two or more electrical wires, depending on the application requirements. These terminals are designed to ensure the cables remain in place and prevent electrical conduction due to an accidental disconnection. Socket terminals are widely used in electrical control panels, home appliances, and many other industrial applications.

Pin receptacles are designed to connect the pin contacts of a complementary connector with each corresponding pin on the receptacle side. The ports are typically soldered onto a printed circuit board, with the pins protruding from the PCB. Specific designs of pin receptacles can vary, depending on their intended applications. Some examples include round, rectangular, parallel, and perpendicular pin receptacles.

The working principle of each of the 0444-2-17-15-30-14-02-0 terminals is based on mechanical and electrical connection between the pins and the corresponding connector. Socket connectors are designed to ensure reliable electrical connection between the two wire connectors, while the pin receptacles use the pins that protrude from the PCB to engage with the complementary connector for electrical connection. In either case, the terminals are designed to ensure secure and reliable electrical connection.

The design of the 0444-2-17-15-30-14-02-0 terminals also includes insulation for the pins in order to prevent short circuits and electrostatic discharge, among other things. Insulation is usually achieved through the use of a plastic material that is injection molded over the pins or along the socket connectors. This is done to ensure that the connection remains protected and secure, no matter the application.

Finally, the 0444-2-17-15-30-14-02-0 terminals also come in a variety of shapes, sizes, and designs. The design of the contact pins, socket connectors, and pin receptacles are all dependent on the application the terminals will be used for. Some of the most common types of terminals in this category are the round pin receptacles, the square pin receptacles, the board-to-board terminals, and the plastic pin receptacles.

In conclusion, the 0444-2-17-15-30-14-02-0 application field and working principle can be classified into the terminals – PC pin receptacles, socket connectors. These terminals are designed for a variety of applications and are meant to connect and secure two or more pieces of equipment or components. This connection is achieved through a variety of designs, ranging from round pin receptacles to board-to-board connections. The working principle of these terminals is based on reliable electrical and mechanical connection between the pins and their corresponding connectors. Finally, these terminals are designed with insulation in order to protect the connection from damage due to short circuits or electrostatic discharge.

The specific data is subject to PDF, and the above content is for reference